Installation Guide

2
Cautions:
1. Keep all children and pets away from assembly area. Children and pets should be
sup
ervised when they are in the area of pavilion construction.
2. The area for assem
bly should not be less than 6 feet from any obstruction such as fence,
garage, house, over hanging branches, laundry line or electrical wires.
3. This unit i
s heavy. Do not assemble this item alone. Four people are recommended for safe
assembly.
4. Some part
s may contain sharp edges. Wear protective gloves if necessary during assembly
.
5. When a
ssembling and using this product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment. Please read all
instructions before assembly and use.
6. For outd
oor use only. Install on level ground. 16 stakes are provided to secure t
he pavilion in
the gro
und. If you wish to secure the pavilion to a wood deck or concrete surface, you will need
to purchase fasteners appropriate for these surfaces. These are readily available at your local
hardware store or home center.
7. Che
ck all bolts for tightness before and during usag
e.
8. Please ch
eck your state and local regulations prior to purchasing. Some jurisdictions ma
y
requi
re permits for, or otherwise regulate, installation and use.
9. While this
pavilion is manufactured to withstand gale force winds utilizing only the supplie
d
grou
nd stakes, in areas subject to frequent severe weather, securing the pavilion to a deck,
concrete patio or footings should be considered.
10. Y
our pavilion has been engineered to accommodate winter snow loads incurred in most
areas. Removal of accumulated snow on the pavilion roof with a roof rake is recommended. In
areas that are regularly subject to blizzard conditions however, removal of the roof panel is
suggested. The assembled roof structure can simply be left intact until warmer conditions
return.
Assembly Instructions:
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start
to finish. The final product will be a quality piece that will go together smoothly and give years
of enjoyment.
Parts identification: For ease of identification, all parts are labeled to correspond to the Step
number in which the part is used.