Assembly Instruction D-GG001PST-F1 Production Number:2018xxxx
Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase. Our clear, easy to follow, step by step instructions will guide you through the project from start to finish Please do not return this product to the store. For technical assistance or replacement parts, please call Sunjoy Group at 1 (866) 578-6569 between 8:00 AM EST and 8:00 PM PST.
Parts List Post (1) A1 2 Post (2) A2 1 Post (3) A3 1 Big Beam B 4 Big Connector C 1 Small Beam D 4 Long Screen E 2 Short Screen F 2 Glass Panel G1 1 Glass Panel G2 1 Hook rack H 1 Bolt I 20 Bolt II 3 Big Canopy J 1 Small Canopy K 1 Hook L 1 LED Light M 4
Fig.1: Attach the Long Screen (E) and the Short Screen (F) to Post (A1、A2、A3) with the Bolt (I). Fig.2: Attach the Big Beam (B) to the Big Connector (C), and then attach the Hook (L ) to the Big Connector (C). Fig.3: Insert the connector of the Big Beam (B) into the intubation tube of Post (A1, A2, A3), then put the Big Canopy (J) on big top, do not fully spread. Fig.4: Insert the bottom connector of the Small Beam(D)to the upper pole of the Big Beam(B). Fig.
Hardware Pack FF Φ 6X230MM Floor Nail 8PCS Fig.7: Extend the Big Canopy (J) onto the big top by fixing the canopy at four corners of top. Fig.7-1: Attach the Hook (H) to Glass Panel (G2) with the Bolt (II). Fig.8: Insert the Glass Panel (G1, G2) into the Post (A1, A2, A3), then attached them tightly with the Bolt (I). Fig.9: Fix the gazebo to the lawn by using the Floor Nail (FF).