Assembly Instruction Model No. D-BS864SAL IMPORTANT: Please read instructions thoroughly before assembling. Familiarize yourself with the inventory of parts and the accompanying illustrations to assure safe and proper assembly.
Table of Contents 2 Important Safety Instructions 2 Parts List 3 Assembly 4-7 Technical Data 8 Care & Maintenance 8 Warranty 8 WARNING: Repeated assembly can weaken the locking ability of the washers. Please periodically check all bolted connections on your bistro to ensure they are tight and secure. DO NOT over-tighten any screws or nuts. DO NOT operate if any part is damaged or broken. NOT FOR USE BY CHILDREN.
Model No.
A B C
Model No. D-BS864SAL Step 1: Insert threaded rod (AA) into each hole in bottom of back (A), then connect seat (B) to back (A) with flat washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 1. Do not tighten at this step. FF BB CC B AA A Fig. 1 Step 2: Insert threaded rod (AA) into each leg-hole in seat (B), then connect legs (C) to seat (B) with flat washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 2. Tighten all the nuts using wrench (DD). C FF BB CC AA B Fig.
D E F
Model No. D-BS864SAL Step 3: Connect support frame (F) to legs (E) with flat washers (JJ), spring washers (II) and bolt (GG), as shown in Fig. 3. Do not tighten at this step. E F JJ II GG Fig. 3 Step 4: Insert threaded rod (HH) into each leg-hole in table-top, then connect table top (D) to legs (E) with flat washers (CC), spring washers (BB) and nuts (FF), as shown in Fig. 4. Tighten all the nuts using wrench (DD). D FF E BB CC HH Fig.
i 8 • Before using, clean the bistro set completely with a soft dry towel. • Do not place your bistro set in wet conditions where there is a risk of rust developing. • When not in use, wipe off any dirt or loose objects, wash with water, rinse thoroughly and dry completely. • Do not use strong detergent or abrasive cleaners. • When not in use, store in a cool, dry location away from sunlight. Dimensions Table: 24” Diameter x 28 1/2” H 45 x 41.5 x 85.