Use and Care Manual

ManualsBrandsSunjoy ManualsBistro SetsVining 3-Piece Patio Bistro Set with Green Cushions

Vineyard 3pc Bistro Set - Rocking Chair

Item # L-BS507SAL

Congratulations on your purchase of our SUNJOY Vineyard 3pc Bistro Set. Our clear, easy

to follow, step-by-step instructions will guide you through the assembly process from start

to finish.

WARNING:

 Keep all children and pets away from assembly area. Children and pets should be

supervised when they are in the area of the chair construction.

 Keep assembly area at least 6 feet from any obstruction such as a fence, garage,

house, overhanging branches, laundry line or electrical wires.

 Some parts may container sharp edges. When assembling and using this product,

basic safety precautions should always be followed to reduce the risk of personal

injury and damage to the product. Please read all instructions before assembly and

use.

 For outdoor use only.

 Check all bolts for tightness before use, and periodically check and tighten bolts as

necessary.

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and

easy operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569

from 8:30AM to 5:30PM EST

or email us at sams

sun

rou

.com for assistance.

Summary of content (7 pages)

PAGE 1
Vineyard 3pc Bistro Set - Rocking Chair Item # L-BS507SAL Congratulations on your purchase of our SUNJOY Vineyard 3pc Bistro Set. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. WARNING:      Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the chair construction.
PAGE 2
Part List No Description Qty A Chair Rest 1 B Chair Base 1 C Foot Cap (Pre-assembled on Part B) 6 D Bolt 4 E Nut (Four nuts are pre-assembled on Parts A, J) 8 F G H I Split Washer (Four Split Washers are pre-assembled on Parts A, J) Flat Washer (Four Flat Washers are pre-assembled on Parts A, J) T Frame (Pre-assembled on Part B) Square Washer (Four square washers are pre-assembled on Parts A, J) 8 8 1 6 J Fiberboard (Pre-assembled on part A) 2 K Bolt (Pre-assembled on Parts
PAGE 3
Assembly Steps: Attach the chair rest A to the Fiberboard J and the T Frame H of the Chair Base B using the Square Washer I, and the Bolt D. Connect together using the Flat Washer G, the Split Washer F, and the Nut E; then tighten firmly using Wrench M. Care &Maintenance Before using, clean the chair completely with a soft dry towel. Do not place your chair in wet conditions where there is a risk of rust developing.
PAGE 4
box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy Industries for products in current production, at nominal cost. Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered.
PAGE 5
Vineyard 3pc Bistro Set - Table Item # L-BS507SAL Congratulations on your purchase of our SUNJOY Vineyard 3pc Bistro Set. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. WARNING:     Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the table construction.
PAGE 6
Part List No Description Qty A Umbrella Cap 1 B Table Top 1 C Left side panel 1 D Right side panel 1 E Umbrella Tube 1 F Base 1 8 AA Split Washer BB Spring washer M6 8 CC Bolts M6×20 8 DD Flat washer M12 1 EE Nut M12 1 FF Wrench M6 1 GG Wrench M12 1 HH II M6 Footpad 4 (pre-assembled onto F) Adjustable knob （pre-assembled onto E） 1 Step1: Step 2: Attach Right Side panel D onto the Base F, Fasten the Umbrella Tube E into Nut EE on tighten with bolt CC
PAGE 7
Step 3: Attach Table Top B onto side panels C/D, tighten with bolts CC, flat washer AA, split Step 4: Place Umbrella Cap A onto Table Top B washer BB. (Tool needed: Wrench GG) Care &Maintenance Before using, clean the table completely with a soft dry towel. Do not place your table in wet conditions where there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.