Assembly Instructions D-BS950SWD-RC Part List Part Description Qty. A Armrest 2 B Back Leg 2 C Front Leg 2 D Rocking Bar 2 E Support Bar 2 F Seat 1 G Back 1 Hardware Pack Part Description Qty.
Step 1: Attach Back Leg (B) to Front Leg (C) with Screw DD(see Fig.1). Step 2: Attach Rocking Bar (D) to Front Leg (C) and Back Leg (B) with Bolt AA, Washer GG and Nut CC (see Fig.2). Step 3: Attach Seat (F) to Front Leg (C) and Back Leg (B) with Screw DD(see Fig.3). Step 4: Attach Back (G) to Back Leg (B) with Screw DD(see Fig.4). Step 5: Attach the front of Armrest (A) to Front Leg (C) with Screw DD(see Fig.5). Step 6: Attach the back of Armrest (A) to Back (G) with Screw FF and Washer GG(see Fig.6).
WARNING: Repeated assembly can weaken the locking ability of the screw/bolt/nut. Periodically check all bolted connections on your product to make sure they are tight and secure. Keep these instructions for future reference. Some parts may contain sharp edges. Wear protective gloves as necessary. Set it up on the level ground.
