Assembly Instructions Item# D-CM003PST / L-CM062PST-1-BR
Part List NO DESCRIPTION QTY A Finial 1 B Top cover 1 C Large cover 1 D Support ring 1 A B E Top panel 1 C F Back screen 1 G D Right / left screen 2 H Leg - top portion 4 I Door 1 J Grill 1 G H K Firepan 1 I L Base panel 1 M Leg - bottom portion 4 N Ash pan 1 O Poker 1 AA M6 x 15 MM cross head bolt 20 BB M6 x 15 MM hex bolt CC M6 x 10 MM cross head bolt 8 DD M6 Nut 4 EE M6 wrench 1 E F J K L M N O 4 PICTURE
CC G F AA G L I Step 1 Connect door (I) and back screen (F) with Right / left screens (G) by using 8pcs M6 x 10 MM cross head bolt (CC). Step 2 Connect Base panel (L) with Right / left screens (G) by using 4pcs M6 x 15 MM cross head bolt (AA). E G AA AA DD H M Step 3 Connect Top panel (E) with Right / left screens (G) by using 4pcs M6 x 15 MM cross head bolt (AA) . Step 4 Attach Leg top portions (H) to bottom portions (M) by using 4pcs M6 x 15 MM cross head bolt (AA) and 4pcs M6 nut (DD).
BB EE D H J K L Step 6 Connect top support ring (D) with previous assembled fireplace by using 4pcs M6 x 15 MM hex bolt (BB) with Wrench (EE). Step 7 Put Firepan (K) onto the Bottom panel (L), then put Grill (J) into Firepan (K). A/B C D N K Step 8 Inset Ash pan (N) into Firepan (K). O Step 9 Attach Finial (A) to Top cover (B), place Large cover (C) on Support ring (D), and then put the assembled top cover onto Large cover (C).
CAUTION: 1. Read and follow all Safety Statements, Warnings, Assembly Instructions, and Use & Care directions before attempting to assemble. 2. Some parts may contain sharp edges. Wear protective gloves if required. 3. Metal is susceptible to rust. Before using, clean the metal surface completely with a soft dry towel. If rust develops, clean the area by sanding lightly, and then wipe thoroughly and apply touch-up paint. 4. Check Local Fire Regulations before using this fireplace. 5.
