Instructions / Assembly

September 16 (实际生产日期) Made In China 3 / 4
ASSEMBLY STEPS
Step 1:
Place Upper Base (C) be upside down on a flat and
clean surface, then assemble 4pcs Posts (F) and
Upper Base (C) together with 4pcs Bolts (AA) and
Flat Washer (BB).
Step 2:
Place Rear Board (E), Side Mesh (D) and Door (G)
between two Posts (F), and use 16pcs Bolts and Flat
Washers. Fasten with Wrench (DD). Do not tighten now.
Place the door as the arrow direction.
Step 3:
Place the assembled parts on the Base (K), and fix all
4pcs Posts using 4pcs Bolt (AA) and Flat
Washer (BB).Tightened all Bolts now with Wrench
(DD) (Do not over tighten (to avoid stripping them).
Step 4:
Attach Door Holder (I) to Door (G) through Door (G),
and Slice (H), then attach it with Nut (CC) as shown in
above.