Instructions / Assembly

Production Number: XXXXXXXX Made In China 3 / 4
Step 3:
Place the C, D, E as show in figure. Screw them with
eight Bolt M6*25 (AA) and Flat washer M6 (CC). Do
not over tighten.
Step 4:
First turn the installed panels around 180 degrees,
bottom up, then cover the Base (J) on the panel as
picture, screws on panel screw through Base(J),securing
with four Flat washer M6 (CC) and Nut M6 (DD)
Step 5:
Turn over the panels, Base (J) on the ground, open the
Door (F), place the Big Top (B) on the panels, assemble
them with four Flat washer M6 (CC) and Nut M6 (DD)
tightly.
Step 6:
Open the Door (F), put Fire Bowl（I）in Base (J), Put Poker
(K) aside for use.