Instructions / Assembly

ManualsBrandsSunjoy ManualsOutdoor Fireplaces63 in. Tahoe Steel Fireplace

May 16 Made in China 1 / 13

FREESTANDING FIREPLACE

MODEL#L-OF120PCO / D-OF005PCO

ASSEMBLY INSTRUCTIONS

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.

IMPORTANT

For technical assistance on assembly or replacement parts, you can call us toll-free at 1-866-578-6569 from 8 a.m. EST to

8 p.m. PST or email to customer.care@sunjoygroup.com or visit www.sunjoyonline.com to place your order or fax your

parts replacement order form together with your purchase receipt to 1-740-283-3549 for assistance

WARNING

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other fireplace.

An LP-cylinder not connected for use should not be stored in the vicinity of this or any other fire pit.

DANGER

CARBON MONOXIDE HAZARD

This fireplace can produce carbon monoxide which has no odor.

Using it in an enclosed space can kill you.

Never use this fireplace in an enclosed space such as a camper, tent, car or home.

WARNING: For Outdoor Use Only.

DANGER

If you smell gas:

1. Shut off gas to the fireplace.

2. Extinguish any open flame.

3. If odor continues, keep away from the fireplace and

immediately call 911 or fire department.

WARNING:

Improper installation, adjustment, alteration, service or

maintenance can cause injury or property damage. Read the

installation, operating and maintenance instructions

thoroughly before using this equipment.

This Fireplace complies with “ANSI Z21.97-2014/CSA 2.41-2014Outdoor Decorative Gas Appliances.

Pro

ane tank re

uired

(

not included

)

. AA batter

uired

(

not included

)

Summary of content (13 pages)

PAGE 1
FREESTANDING FIREPLACE MODEL#L-OF120PCO / D-OF005PCO ASSEMBLY INSTRUCTIONS IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. IMPORTANT For technical assistance on assembly or replacement parts, you can call us toll-free at 1-866-578-6569 from 8 a.m. EST to 8 p.m. PST or email to customer.care@sunjoygroup.com or visit www.sunjoyonline.com to place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for assistance WARNING: For Outdoor Use Only.
PAGE 2
TABLE OF CONTENTS General information …………….…….………………………..………….……… 2 Installation………………………….………………………..……….…….………. 2 Location………………………………………………………………….…….……. 2 Specification……….…………………………………………….……….………… 3 Important safety information and precaution……….….….….…….…………... 3-4 Expanded view…………………………………………………….……..………… 5 Parts list and hardware list…..………………………….…..……………….……. 6 Assembly Steps……………………………………………………………………… 6-9 Set up……………………………………………………………….………...……...
PAGE 3
SPECIFICATION Product name FREESTANDING FIREPLACE Model NO. L-OF120PCO / D-OF005PCO Rated Heat Input 64,500 BTU / HR Fuel Propane-LP Gas Supply 20 lb. LP-Gas cylinder Manifold Pressure 11 Inches W.C. Orifice Size (diameter) 2.48 mm / 0.097 in Gas Supply Pressure Max.
PAGE 4
 Clothing or other flammable materials should not be hung from the fireplace.  Do not use the fireplace if any part has been under water. Immediately call a qualified technician to inspect the fireplace and to replace any part of the control system and any gas control which has been under water.  LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP-gas cylinders of the U.S. Department of Transportation (DOT).
PAGE 5
EXPANDED VIEW H I J K May 16 L M N O P Q Made in China 5 / 13
PAGE 6
PARTS LIST PART # DESCRIPTION QTY PART # DESCRIPTION QTY A Cap 1 J Ignition Wire 2 B Chimney 1 K Thermocouple 1 C1 Body Panel (Front) 1 L Nozzle Support Bar 1 C2 Body Panel (Rear) 1 M Nozzle Subassembly 1 C3 Body Panel (Inside) 2 N Pulse Electronic Igniter 1 C4 Body Panel (Right) 1 O Control valve 1 C5 Body Panel (Left) 1 P Control Knob 1 D Back Door (Removable) 1 Q Pressure Regulator 1 E Log Holder 1 1 1 Ceramic Log 1 2 F Log Holder 2 2 2 Cera
PAGE 7
Fig.1: Attach Body Panel (Front) and Body Panel (Rear) (C1, C2) together with bolt (EE) and washer (BB). Fig.2: As the arrow shows, slide Body Panel (Left) and Body Panel (Right) (C4, C5) into the assembled C1 and C2. Fig.3: Turn the body assembled at Fig.1 and Fig.2 upside and secure these panels with bolt (EE) and washer (BB). Fig.4: Align Chimney (B) onto Fireplace Body (C1/C2) and secure from inside with bolt (AA) and washer (BB). Fig.
PAGE 8
Fig.7 ： As the above arrow shows, place assembled fireplace body (C1/C2/C3/C4/C5) onto Fireplace Base (G) and align with the pins that are built in the body. Fig.8：Place Cap (A) on the assembled Chimney (B). Fig.9: Ceramic Logs Placement Fig.9-1：Place Ceramic Log 2 (2) inside of Log Holder (E), place Ceramic Log 3 (3) inside of Log Holder (F), make sure the pins of the logs face up. See Fig.9-1 Fig.9-2：Place Ceramic Log 4 on Ceramic Log 2. Fig.
PAGE 9
Fig.10：Assembling Back Door (D) Insert Back Door (D) into Body Panel (Rear) (C2) by aligning the pins of the back door at the bottom edge into the holes of the body, see Fig10-1. Pull the ring down at the back door until the pin on the upper edge of the back door lock into the body. Fig.11：Back Door (D) is removable by pulling down the ring until it opens, releasing the back to open both sides of the fireplace, see Fig.11-1 & Fig.11-2.
PAGE 10
SET-UP Your gas fireplace comes ready for gas connection. 1. Place fireplace on any level, outdoor, non-combustible surface. NOTE: Do not place this fireplace on grass or dirt area as this may prevent proper safety venting. 2. Open the gas door and place the cylinder inside. 3. Unscrew the battery box as shown in Fig.1. Insert the negative side of the battery (not included) into the bottom of battery box as shown in Fig 2. Then screw in the battery box as shown in Fig 3.
PAGE 11
OPERATION LEAK TEST !!!WARNING!!!  Do not use an open flame to check for leaks.  Do not smoke during testing.  Do not test indoors.  A leak check must be performed whenever the gas cylinder is replaced. 1. 2. Make sure the control knob is in the “OFF” position. Make sure the gas cylinder is correctly and securely connected to the pressure regulator, without over tightening. 3. Turn on the gas cylinder valve.
PAGE 12
STORAGE AND MAINTENANCE To obtain the best performance from your fireplace, you must perform the following storage and maintenance activities on a regular basis:  Allow at least 35 minutes for the fireplace to cool down after use, before disconnecting and removing the gas cylinder.  Store the gas cylinder in a dry, well-ventilated and sheltered area protected from inclement weather and dust, out of the reach of children, and not in a building, garage or any other closed area.
PAGE 13
LIMITED WARRANTY Subject to the conditions set out below, this product is warranted to the original purchaser to be free from defects in workmanship and materials for twelve (12) months from the date of purchase.  Satisfactory proof of the purchase date must be furnished at the time of notification of the defect for any claim under the warranty to be enforceable.