Instructions / Assembly

May 16 Made in China 4 / 13
 Clothing or other flammable materials should not be hung from the fireplace.
 Do not use the fireplace if any part has been under water. Immediately call a qualified technician to inspect the
fireplace and to replace any part of the control system and any gas control which has been under water.
 LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for
LP-gas cylinders of the U.S. Department of Transportation (DOT).
 The cylinder supplies system must be arranged for vapor withdrawal and the cylinder must include a collar to
protect the cylinder valve.
 Use only 20 lb / 9 kg LP-Gas cylinders.
 Do not burn wood or any other materials in this fireplace.
 The fireplace must be isolated from the gas supply piping system by closing its
individual manual shutoff valve during any pressure testing of the gas supply piping
system at test pressure equal to or less than 1/2 psi (3.4kPa).
 Properly place the hose out of pathways where people may trip over it or in areas
where it may be subject to accidental damage.
 The burner must be replaced prior to the fireplace being put into operation if it is
evident that the burner is damaged. The replacement burner must be the same as the part specified by
manufacturer.
 For cleaning of the fireplace including the burner, please refer to “Clean and Maintenance” on page 12.