Instructions / Assembly

May 16 Made in China 7 / 13
Fig.1: Attach Body Panel (Front) and Body Panel (Rear) (C1,
C2) together with bolt (EE) and washer (BB).
Fig.2: As the arrow shows, slide Body Panel (Left) and Body
Panel (Right) (C4, C5) into the assembled C1 and C2.
Fig.3: Turn the body assembled at Fig.1 and Fig.2 upside and
secure these panels with bolt (EE) and washer (BB).
Fig.4: Align Chimney (B) onto Fireplace Body (C1/C2) and
secure from inside with bolt (AA) and washer (BB).
Fig.5：Insert Log Holder (E) into the tube of Burner
(H) which is built up on Fireplace Base (G).
Fig.6：Place Log Holders (F) in Log Tray (I) and
secure them with bolt (CC) and washer (BB).