ITEM NO.:A102009100 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/ 25 Table of Contents Table of Contents .......................................................... 2 Safety Information......................................................... 2 Warranty ......................................................................... 2 What is Covered .......................................................................2 What is Not Covered ................................................................2 Pre-Assembly .......................................................
/ 25 Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
/ 25 Pre-Assembly (continued) PACKAGE CONTENTS I2 A1 J4 B1 J5 C out J6 D3 out D4 K out E3 L out E4 M F1 N out G1 G2 H1 Country of Origin: China P1 P2
/ 25 Pre-Assembly (continued) Q1 T6 Q2 T7 T8 Q3 U R1 V R2 W1 R3 R4 W2 W3 S1 W4 S2 S3 T5 Country of Origin: China
/ 25 Pre-Assembly (continued) Part Part Number Description A1 P000200311 Post 4 B1 P000100191 Stake base 4 C P006100120 Stake cover 4 D3 P000400666 Long cross beam (Left) 2 D4 P000400667 Long cross beam (Right) 2 E3 P000400664 Short cross beam ( Right ) 2 E4 P000400665 Short cross beam ( Left ) 2 F1 P000500786 Slanting beam connector 4 G1 P000500787 Middle beam connector 1 4 G2 P000500788 Middle beam connector 2 4 H1 P000600970 Slanting beam 4 I2 P000600972
/ 25 Assembly 1 Attaching the Stake Bases and Slanting Beam Connectors Slide the Stake covers (C) over the Posts (A1). Attach the Stake bases (B1) to the Posts (A1) using Bolts (CC) and Flat washers (BB). Attach the Slanting beam connectors (F1) to the top of the Posts (A1) using Bolts (AA) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 2 Connecting the Cross Beams Attach the Middle beam connectors 1 (G1&G2) on the Cross beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB), Spring washers (LL), and Nuts (EE). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 3 Attaching the Cross Beams Attach the assembled Cross beams (D3&D4, E3&E4) to the Posts (A1) using Bolts (AA), Flat washers (BB) and Spring washers (LL). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 4 Attaching the Curve Supports Attach the Curve supports (U) to the Posts (A1) and Cross beams (D3&D4, E3&E4) using Bolts (KK), Flat washers (BB) and Spring washers (LL). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 5 Connecting the Big Roof Assemble the Big top connector tubes (J4&J5) with the Big top connectors (J6) using Bolts (CC) and Flat washers (BB). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 6 Attaching the Slanting Beams Connect the top of the Slanting beams (H1) with the Big top connectors (J6) using Bolts (AA) and Flat washers (BB). Connect the bottom of the Slanting beams (H1) with the Slanting beam connectors (F1) using Bolts (AA) and Flat washers (BB). Tighten the bolts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 7 Attaching the Middle Beams Connect the top of the Middle beam 2 (I2) with the Big top long connector tubes (J4) using Bolts (AA) and Flat washers (BB). Connect the bottom of the Middle beam 2 (I2) with the Middle beam connector 1 (G1) using Bolts (DD), Flat washers (BB) and Nuts (EE). 8X NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 8 Attaching the Hook and the Small Roof Support Beams Insert and screw the Hook (N) tightly into the corresponding hole on the Small roof connector (L). Attach the Small roof support beams (K) to the Small roof connector (L) using Bolts (DD), Flat washers (BB) and Nuts (EE). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 9 Attaching the Small Roof Attach the Small roof support beams (K) to the Big Top Connector (J6) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 10 Attaching the Small Roof Panels Attach the Small roof long panels (P1) and Small roof short panels (P2) to the Small roof frame using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 11 Attaching the Small Roof Support Beam Covers Attach the Small roof support beam covers (S1) to the Small roof frame using Bolts (KK) and Flat washers (BB). Then place the Small roof covers (M) in the Small roof connector and secure using Bolts (II) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 12 Attaching the Big Roof Beams and the Big Roof Lower Beams Attach the Big roof short side beams (W2) to the top of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). Tighten the bolts. Attach the Big roof long side beams (W1) to the top of Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). Tighten the bolts.
/ 25 Assembly 13 Attaching the Pipes Attach the Pipes (T5&T6&T7&T8) to the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 14 Attaching the Big Roof Upper Panels Attach the Big roof panels (Q1, R1, R2) to the Slanting beams (H) and Middle beams (I) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 15 Attaching the Big Roof Bottom Panels Attach the Big roof panels (Q2, Q3, R3, R4) to the Slanting beams (H) and Middle beams (I) using Bolts (CC) and Flat washers (BB). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 16 Attaching the Slanting Beam Covers Attach the Slanting beam covers (S2) to the Slanting beams (H) using Bolts (KK) and Flat washers (BB). Repeat for the Middle beam covers (S3). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Assembly 17 Hanging the Mosquito Netting Hang the Mosquito netting (V) to the Pipes (T5, T6, T7, T8) using the Plastic rings (GG). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Montage 18 Finition du Montage Attach the assembled pergola to lawn with Stake (HH). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 25 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.