Installation Guide
12 / 25
Country of Origin: China
Assembly
6
Attaching the Slanting Beams
Connect the top of the Slanting beams (H1) with the Big top connectors (J6) using Bolts (AA) and Flat washers (BB).
Connect the bottom of the Slanting beams (H1) with the Slanting beam connectors (F1) using Bolts (AA) and Flat washers (BB). Tighten the
bo
lts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
24X
24X
4X