Installation Guide

13 / 25
Country of Origin: China
Assembly
7
Attaching the Middle Beams
Connect the top of the Middle beam 2 (I2) with the Big top long connector tubes (J4) using Bolts (AA) and Flat washers (BB).
Connect the bottom of the Middle beam 2 (I2) with the Middle beam connector 1 (G1) using Bolts (DD), Flat washers (BB) and Nuts (EE).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
24X
8X
4X
8X
8X