Installation Guide

18 / 25

Country of Origin: China

Assembly

Attaching the Big Roof Beams and the Big Roof Lower Beams

 Attach the Big roof short side beams (W2) to the top of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers

(BB). Tighten the bolts.

 Attach the Big roof long side beams (W1) to the top of Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB).

Tighten the bolts.

 A

ttach the Big roof short side lower beams (W4) to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat

washers (BB).



Attach the Big roof long side lower beams (W3) to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat

washers (BB).

NOTE: To avoid destroying the finish, do not put the parts on the ground directly.

32X