Installation Guide

8 / 25
Country of Origin: China
Assembly
2
Connecting the Cross Beams
 Attach the Middle beam connectors 1 (G1&G2) on the Cross beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB), Spring washers (LL),
an
d Nuts (EE). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
2X
2X
16X
2X
2X
4X
4X
16X 16X
32X