ITEM No.: A101011700 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/ 10 Safety Information Two people are required for this assembly. Some parts may contain sharp edges. Wear DANGER: This unit is heavy! Do not assemble this item alone. protective gloves. When assembling and using this product, WARNING: Do not leave the gazebo where there basic safety precautions should always be is a risk of high wind, as possible damage will followed to reduce the risk of personal occur to the structure. injury and damage to equipment.
/ 10 Parts List Description Label Part Number Qty Top connector A P000501261 1 Hook B P005800001 1 Slant beam for big roof C1 P000601481 4 Pipe under for slant beam C2 P000601483 4 Middle beam D P000601482 4 Long beam 1 E1 P000400945 2 Long beam 2 E2 P000400944 2 Short beam 1 F1 P000400943 2 Short beam 2 F2 P000400942 2 Decorative tube G P005600325 4 Netting bar H P005700699 8 Pipe under for middle beam I P000501262 4 Pipe under for slant beam J P00050
/ 10 Base N P000100347 4 Base cover O P006100184 4 Small canopy P P001100581 1 Big canopy Q P001100582 1 Mosquito netting R P001200228 1 Curtain S P001300110 1 Hardware Pack Label Description Part Number Qty AA M6*15 bolt H010110016 8 BB M6 flat washer H050010023 116 CC M6*20 bolt H010020012 60 DD M6*35 bolt H010020013 40 EE M6 Nut H040010011 8 FF Ring R079990136 96 GG Ф6*230 Stake H070010008 8 Z Wrench M6 H090010009 2 Country of Origin: China P
/ 10 Fig.1: Put Base cover(O)through Post and lift up base cover,then attch base(N)to bottom of post by using bolt(AA)、 washer (BB). Fig.2:Insert beam 2(F2/E2)to beam 1(F1/E1)by using bolt(CC), washer (BB). Fig.3:Attach long beam(E1/E2)to Post(K)by using bolt(CC), washer (BB).
/ 10 Fig.4: Attach short beam (F1/F2)to long beam(E1/E2) by using bolt(CC), washer (BB). Fig.5: Insert Decorative tube(G) to long beam(E1/E2)by using bolt(CC), washer (BB). Fig.6: Attach Netting bar(H)to beam(F1/F2/E1/E2)by using bolt(CC), washer (BB). Fig.7: Insert Pipe under for middle beam(I)to beam(F2/E2). Fig.8: Attach Pipe under for slant beam(J)to beam(F1/F2/E1/E2)by using bolt(CC), washer (BB). Fig.9: Attach Support triangle(L)to Post(K) by using bolt(DD), washer (BB).
/ 10 Fig.10: Insert Pipe under for slant beam(C2)to Slant beam for big roof(C1)。 Fig.11: Insert Slant beam for big roof(C1)to Top connector(A). Fig.12: Attach Pipe under for slant beam(C2)to Pipe under for slant beam(J)by using bolt(DD), washer (BB) and nut(EE). Fig.13: Insert Middle beam(D)to Top connector(A). Fig.14: Attach Middle beam(D)to Pipe under for middle beam(I)by using bolt(DD), washer (BB) and nut(EE). Fig.
/ 10 Fig.16-1: Put small canopy(P)to small top ,then button up the corner to adjust tube. Fig.16-2: Adjust the adjust tube(M)to tightly. Fig.17-1: Put big canopy(Q)to big top ,then button up the corner to adjust tube. Fig.17-2: Adjust the adjust tube(M)to tightly.
/ 10 Fig.18: Hang Mosquito netting(R)to Netting bar(H)by using ring(FF). Fig.19: Hang Curtain(S)to beam(F1、F2、E1、E2)by using ring(FF). Fig.20: Screw hook (B) to Top connector (A).。 Fig.21: By using stake(GG) assembled gazebo on ground.
/ 10 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.