Use and Care Manual

6 / 10
Country of Origin: China
Fig.4: Attach short beam (F1/F2)to long beam(E1/E2) by using bolt（CC）, washer (BB).
Fig.5: Insert Decorative tube(G) to long beam（E1/E2）by using bolt（CC）, washer (BB).
Fig.6: Attach Netting bar（H）to beam（F1/F2/E1/E2）by using bolt（CC）, washer (BB).
Fig.7: Insert Pipe under for middle beam（I）to beam（F2/E2）.
Fig.8: Attach Pipe under for slant beam（J）to beam（F1/F2/E1/E2）by using bolt（CC）, washer (BB).
Fig.9: Attach Support triangle（L）to Post（K） by using bolt（DD）, washer (BB).