Use and Care Manual

7 / 10
Country of Origin: China
Fig.10: Insert Pipe under for slant beam（C2）to Slant beam for big roof（C1）。
Fig.11: Insert Slant beam for big roof（C1）to Top connector（A）.
Fig.12: Attach Pipe under for slant beam（C2）to Pipe under for slant beam（J）by using bolt（DD）,
washer (BB) and nut(EE).
Fig.13: Insert Middle beam（D）to Top connector（A）.
Fig.14: Attach Middle beam（D）to Pipe under for middle beam（I）by using bolt（DD）,
washer (BB) and nut(EE).
Fig.15-1: Insert adjust tube（M）to Pipe under for slant beam（C2）, Slant beam for big roof(C1) and middle beam(D).
Fig.15-2: Adjust the adjust tube（M）to the shortest length,then put Big canopy(Q),don’t button up the corner.