ITEM NO.：A101012202 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/ 22 Safety Information 1. More than two people are required for this assembly. DANGER: This unit is heavy! Do not assemble this 2. Some parts may contain sharp edges. Wear protective gloves. item alone. 3. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage. WARNING: Keep all flame and heat sources away from this gazebo fabric.
/ 22 Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
/ 22 Pre-Assembly (continued) PACKAGE CONTENTS E2 A1 F1 A2 F2 B1 G B2 B3 H C1 I C2 J C3 C4 D1 D2 D3 E1 Country of Origin: China K L M N
/ 22 Pre-Assembly (continued) Part Part Number Description Quantity A1 P000200461 Post 1 4 A2 P000200460 Post 2 4 B1 P006300077 Cross panel 8 B2 P000400897 Long cross beam 2 B3 P000400898 Short cross beam 2 C1 P005700661 Long mosquito netting bar 1 4 C2 P005700662 Long mosquito netting bar 2 4 C3 P005700663 Short mosquito netting bar 1 4 C4 P005700664 Short mosquito netting bar 2 4 D1 P000601344 Upper oblique tube 4 D2 P000601345 Middle oblique tube 4 D3 P
/ 22 Assembly 1 Assembling the Cross Panels Connect 2 sets of Cross Panels (B1) with the long cross beams (B2) using screws (DD). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 2 Assembling the Cross Panels Connect another 2 sets of Cross Panels (B1) with the short cross beam (B3) using screws (DD). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 3 Assembling Mosquito Netting Bars Connect the Long mosquito netting bar 1 (C1) with Long mosquito netting bar 2 (C2). Connect the Short mosquito netting bar 1 (C3) with Short mosquito netting bar 2 (C4) . NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 4 Attaching the Mosquito Netting Bars Attach the assembled Long Mosquito Bars (C1&C2) to the Cross Beam (B1) using bolts (AA). Attach the Short Mosquito Bar (C3&C4) in the same way . NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 5 Assemble the Post 1 and Post 2 Screw the Post 2 (A2) on Post 1 (A1). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 6 Attaching the Crossbeams Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 7 Attaching the Crossbeams Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 8 Assembling the Oblique Tubes Connect the Upper oblique tube (D1), Middle oblique tube (D2) and Bottom oblique tube (D3) using the spring button on the parts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 9 Assembling the Middle Tubes Connect the Bottom long middle tube (E2) and Upper long middle tube (E1) using the spring button on the parts. Connect the Bottom short middle tube (F2) and Upper short middle tube (F1) using the spring button on the parts. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 10 Attaching the Oblique Tube and Hook Inset the Upper oblique tubes (D1) to the Big roof connector (G), then Screw the Hook (K) to the Big roof connector (G). Insert the Bottom oblique tube (D3) to the Post 1 (A1). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 11 Attaching the Middle Tubes Insert the assembled Long middle tube (E1) to the Big roof connector (G), insert the Bottom long middle tube (E2) to the Short cross beam (B3). Insert the assembled Short middle tube (F1) to the Big roof connector (G), insert the Bottom short middle tube (F2) to the Long cross beam (B2). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 12 Assembling the Small Roof Deeply inert the Small roof oblique tube (I) to the Small roof connector (H) to the end (Fig.1), put the small canopy on the small roof and align the corners (Fig.2). Screw the Top decoration (J) on the roof (Fig.3)，pull the Small roof oblique tube (I) back to fit the holl. NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 13 Attaching the Small Roof Put the big canopy (M) on the assembled big roof (D1), connect the assembled small roof (I) with the big roof (D1) using the spring button on the parts before spread the big canopy (M). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 14 Spreading the Big Canopy Spread the Big canopy (M), and first aligning the 4 corners to the Oblique Tubes (D3). Then aligning the big canopy to the middle tube (E1&E2). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 15 Attaching the Curtain and Netting Hang the Mosquito Netting (N) on the Mosquito Netting Bar (C1, C2, C3, C4) using Plastic Ring (CC). NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Assembly 16 Securing the Gazebo Secure the assembled gazebo to the lawn with the Stakes (BB). It is recommended for anchoring on wood or concreate surface for more stability using setscrew (Purchased separately) NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
/ 22 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
