ITEM NO.：A106005600 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/7 Parts List Top beam 1 A1 P000601292 5 Top beam 2 A2 P000601293 5 C1 P000400859 2 D1 P000400858 2 E1 P000400856 2 E2 P000400857 2 Conner 1 G3 P000300084 4 Decorate tube G4 P005600297 4 Post H1 P000200447 4 Stake I P006100162 4 Stake cover J P000100314 4 Arc support K1 P005000393 8 Canopy rod 1 M3 P005700635 6 Canopy rod 2 M4 P005700636 6 Canopy rod 3 M5 P005700637 2 Canopy rod 4 M6 P005700638 2 Rail connector N P000501119 2 Rail beam 1 O1
/7 Hardware Pack 1 AA M6*15 bolt H010110016 16PCS BB M6 washer H050010023 52PCS CC M6*20 bolt H010020011 36PCS Z M6 Wrench H090010009 1 PC Country of Origin: China
/7 Fig.1:Put the stake cover（I1）through the post (H1), up the stake cover(J), then attach stake(I) to post bo ttom（H1），fasten by using bolt（AA）and washer（BB）。 Fig.2‐1: Attach long side beam 1（C1）to long side beam2（D1）, By using bolt（CC）and washer（BB）。 Fig.2‐2: Attach short side beam 1（E1）to short side beam2（E2）,by using bolt（CC）and washer（BB）. Fig.4: Attach corner（G3）to top of post （H1）。 Fig.5‐1:Attached long side beam（C1、D1）to top of post（H1） ，then fix by using bolt（CC）and washer（BB）。 Fig.
/7 Fig.6:Attach rail connector（N）to long side beam（C1、D1）by using bolt（CC）and washer（BB）. Fig.7:Put ring （P）through rail rod（O1、O2）,then attach rail rod（O1、O2）to rail connector（N）。 Fig.8:Fix rail rod（O1、O2）to long side beam（C1、D1）, by using bolt（CC）and washer（BB）。 Fig.9: Attach top beam 1（A1）to top beam 2（A2）, fix by using bolt（CC）and washer（BB）。 Fig.10: Fix assembled top beam(A1、A2) to assembled long side beam（C1、D1）,by using bolt （DD）and washer (BB）。 Fig.
/7 Fig.12: Insert canopy rod 1（M3）into canopy rod 2（M4） （repeat , step,insert canopy rod3（M5）into canopy rod 4（M6）. Below graph presents the assembly detail for beam (M3,M4,M5,M6) Fig.13:Insert canopy rod to the hold of canopy（Q）。 （Notes: Insert canopy rod（M5、M6）to the side of handle。） Fig.15:Fix the assembled gazebo on ground by using floor stake(FF). Fig.14:Fix the assembled canopy (Q) to ring (P) by using bolt (EE) and washer (BB).
/7 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
