Installation Guide

3/9
Made in China
 Keep the gas cylinder away from the appliance at a minimum distance of 76.2 cm / 30 in. WARNING: risk of
tripping over the hose, be very careful when pass through the appliance and gas cylinder to prevent from tripping.
 Open the door and inspect the hose assembly and
burner prior to each use. If there is evidence of excessive
abrasion or wear or if the hose or burner is dama
ged, it
must be
replaced by appropriate part from the
manufacturer
.

Inspect the gas connections of the appliance prior to
each use. Do not to operate the unit if there is a gas leak.
Have the appliance inspected annually by a qualified
service pe
rson.

The pressure regulator and hose assembly provided with the appliance must be used. The replacement pa
rt
must b
e the same as the part specified by manufactur
er.
 The assembly of LP-gas and leak checking please refer to the “Gas Connection” on page 5 and “Leak Test” on
page 6.
 Children and adults should be alerted to the hazards of high surface temperatures and
should stay
a
way to avoid burns or prevent clothing ignition
.
 Young
children and pets should be carefully supervised when they are in the area of the applian
ce.
 A
ny guard or other protective device removed for servicing the appliance must be replaced prior to
operation
.
 C
lothing or other flammable materials should not be hung from the appliance or placed on or near th
e
appliance
.
 Do not use the appliance if any part has been under water. Immediately call a qualified technician to inspect the
appliance and to replace any part of the control system and any gas control which has been und
er water.

The cylinder supplies system must be arranged for vapor withdrawal and the cylinder must include a collar to
protect the cylinder valve
.

Use only 9 kg / 20 lb LP-Gas cylinders.
 Do not burn wood or any other materials in this appliance.
 The appliance must be isolated from the gas supply piping system by closing its
individual manual shutoff valve during any pressure testing of the gas supply piping
system at test pressure equal to or less than 1/2psi (3.5kPa)
.

That other cylinder may be acceptable for use with the appliance provided they are
compatible with the appliance retention means and accompanied by illustration(s) depicting the cylinder mounted
to the appliance utilizing the cylinder retention means and the point of contact between the cylinder and the
retention means
.

Properly place the hose out of pathways where people may trip over it or in areas where there may be s
ubject
4
5
c
m
/
1
7
.
7
i
n
3
2
c
m
/
1
2
.
5
i
n