OWNER’S MANUAL Item: L-GZ120PST-9D
Recommended persons for safe assembly: Our clear, easy to follow; step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The assembled product will be a quality piece that will go together smoothly and give years of enjoyment. All you will need is a screwdriver, a hammer, and a ladder not lower than 2m (about 6.6 feet). IMPORTANT: 1.
Parts List Big screen A1 4 Left screen B1 4 Right screen C1 4 Long Bar A2 2 Short Bar A5 2 Larger Roof Connector A3 1 Top Roof Supporter B3 4 Arch bar 1 C3 4 Arch bar 2 C4 4 Arch bar connector C5 8 Side Supporting Bar-Short D2 2 Side Supporting Bar-Long D3 2 Center Hook F3 1 Larger Canopy G3 1 Top Canopy H3 1 Mosquito Netting I3 1
Hardware Pack 1 16pieces (AA) M6x20 Bolt 16pieces (CC) M6 Flat washer 1 piece (W2) M6 Wrench LInsert the left screen (B1) into the big screen (A1), pull it down to fix them, then use screw (AA), washer (CC) to secure left screen (B1) and big screen (A1). Do the same for right screen (C1) and big screen (A1).
Connect long bar (A2) and left screen (B1), long bar (A2) and right screen (C1) by bolt (BB) and washer (CC). Connect short bar (A5) and left screen (B1), short bar (A5) and right screen (C1) in the same way. Hardware Pack 3 24pieces (CC) M6 Flat washer 4pieces (FF) M6x30 Bolt 16pieces (HH) M6x15 Bolt 4 pieces (GG) M6 Nut Attach center hook Insert top roof supporter (B3) into larger roof connector (F3) to larger roof (A3). connector (A3). .
B3 B3 B3 C3 C4 C3 A3 C4 C4 C4 HH C3 C3&C4 Insert arch bar 1(C3) and CC C5 B3 C3 arch bar 2 (C4) into top roof supporter (B3). C4 Insert arch bar 1(C3) and arch bar 2 (C4) into Arch bar connector (C5), fully tighten by bolt (HH) and flat washer (CC). Insert arch bar connector (C5) into big screen (A1).
D2 &D3 A3 CC D2 GG FF A2&A5 D3 Insert side supporting bar-Short (D2) and Connect Side Supporting Bar (D3&D2) and bar side supporting bar-Long (D3) into larger (A2&A5) by bolt (FF), washer (CC) and nut (GG). roof connector (A3). Put Larger Canopy (G3) on to the top frame. Don’t unfold it completely at this time.
Hardware Pack 4 8pieces 56pieces DD Dia.6x180 stake EE plastic ring A 4 Attach Mosquito netting (A4) onto bar (A2, A5) by plastic ring (EE). Fix the completely assembled gazebo by stake (DD).
Limited Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of one (1) year. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product.