Installation Guide

AA
M6X20 Bolt
16 PCS
BB
M6 Flat washer
28 PCS
CC
M6X40 Bolt
8 PCS
DD
M6 Nut
8 PCS
Z
M6 Wrench
1 PC
Hardware Pack 1
Fig.1: Attach Screen C (B) to Pole A1 (A2) by Bolt (AA) and Flat washer (BB).
Fig.2: Attach Hook (J) to Big top connector (E). Then insert Corner top beam (D) into Big top connector (E).
Fig.3: Connect Corner top beam (D) and Pole 2(A2) by Bolt (CC), Flat washer (BB), and Nut (DD).
Fig.4: Insert Small top bar (G ) into Small top connector (F).
Fig.5: First put the big canopy (L) onto the top of the gazebo (Do not fully spread). Then connect Small top
bar (G ) and Corner top beam (D) by Bolt (CC), Flat washer (BB), and Nut (DD).