Alcove Gazebo
Parts List screen A 4 Long beam B 2 Short beam C 2 Main top connector D 1 2nd tier top connector E 1 2nd tier top pole F 4 Curve pipe connector G 4 Long arc beam H 4 I 4 Long middle beam J 2 Short middle beam K 2 hook L 1 Main canopy M 1 2nd tier canopy N 1 Mosquito netting O 1 finial P 1 Short arc beam
Fig.1： Lock the long beam (B)and short beam (C) to the screen (A).
Fig.2： Insert the hook (L) into the main top connector (D). Fig.5：Insert the curve pipe connector (G) into the main top connector (D) Fig.3: Insert the long middle beam (J) into the short beam (C), insert the short middle beam (C) into the long beam (B). Fig.6： Insert the long arc beam (H) and short arc beam (I)into the curve pipe connector (G). Fig.4: Insert the long middle beam (J) and short middle beam (K) into the main top connector (D). Fig.
Fig.8 ： Put the main canopy (M) onto the main top, do not unfold, then nd insert the 2 tier top nd pole (E) into the 2 tier top connector(E). nd Fig.9 ： Put the 2 tier nd canopy (N) on the 2 tier top, secure the four nd corners to the 2 tier top pole. nd Fig.11： Insert the 2 tier top pole (F) into the curve pipe connector (G), open the main canopy(M),and secure the canopy to the screens and beams. HardwarePack 3 FF ￠6*180 ground stake 16pcs GG Plastic loop 52pcs Fig.
Fig.12： Secure the mosquito net (O) to the screen (A) and beams (B)(C)with plastic hook (GG) Fig.13： Secure the gazebo to the lawn with ground stake (FF).
