User Guide

2 EN
Connect Smart Watch
1.Switch watch on: long press the side button for 3-5 seconds
2.Please turn on the phone's Bluetooth and location service and
make sure the watch is not binded to other devices
Open the Dafit APP on your mobile phone Set your personal infor-
mation enter the device interface Click on “Bind Device”Right-slide
on the main dial interface of watch to view MAC address,You can
use the MAC address from the device list to determine your de-
viceThe device name and the corresponding MAC address are
paireddevice is successfully connected.
Step 1: Open “Da Fit APP”--“OK, Allow”--“Add A DEVICE”--Find
LIGE and choose---“Pair”-- “Allow”--Done
Step 2: Go to your mobile phone Bluetooth--Find another LIGE
and choose---connected. So have two “LIGE” Connected.
1. Open the box, use the LIGE charging cable, then insert the USB
to your laptop or any USB port with 5V to charge the Watch before
use to ensure that the Watch is fully charged. The charging time is
about 2 hours. To ensure that the charging contact is good. Please
ensure that the metal surfaces are not dirty, oxidizing and
impurities. When charging, the screen will display the charging
symbol. If the device is not used for a long time, please be sure to
replenish it every one month.
2. When the Watch is first paired with "APP", it will synchronize the
time, date, and quantity of the Watch battery and display the
symbol of success of the BT connection
3. How to Boot Device: Long press the watch key for 5 seconds
and the Watch will boot.
4. How to Shut Down Device: At the watch face page, Long press
the watch key 5 seconds, then choose to shut down. The watch will
be turned off and with vibration.
First time to use the watch, please make sure the battery is fully
charged.
Tips for the first time use: