Instructions / Assembly

A. FLUSH MOUNT

B. RETROFIT A RECESSED CAN

Insert wires into Quick

connector, black to black and

white to white, attach ground

wire to ground screw in recessed

can.

Turn E26 lamp holder

into socket base.

Connect Quick

connectors , Tuck all wires into

recessed can. Squeeze springs

and push up into recessed can.

optional

Mounting Screws

Wire Nuts

Led Mini Panel Fixtures

Mounting Plate

SpringsEE

E26 Lamp HolderFF

Clip

optional

clip

The CCT tunable selsctor switch on

the fixture's back, allows the use

to choose between 3000K,4000,and

5000K before installation.

PAGE 1
GG FF Led Mini Panel Fixtures Mounting Screws Wire Nuts Mounting Plate EE EE Springs FF E26 Lamp Holder GG Clip optional optional optional B. RETROFIT A RECESSED CAN A. FLUSH MOUNT Insert wires into Quick connector, black to black and white to white, attach ground wire to ground screw in recessed can. Turn E26 lamp holder into socket base. Connect Quick connectors , Tuck all wires into recessed can. Squeeze springs and push up into recessed can.
PAGE 2
GG FF Led Mini Panel Fixtures Mounting Screws Wire Nuts Mounting Plate EE EE Springs FF E26 Lamp Holder GG Clip optional optional optional B. RETROFIT A RECESSED CAN A. FLUSH MOUNT Insert wires into Quick connector, black to black and white to white, attach ground wire to ground screw in recessed can. Turn E26 lamp holder into socket base. Connect Quick connectors , Tuck all wires into recessed can. Squeeze springs and push up into recessed can.