Instructions / Assembly

PENDANT LIGHT INSTALLATION
Please read carefully and save these instructions, as you may need them at a later
date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to
prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical
Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring
connections obtain the services of a qualified electrician.
Carefully unpack light fixture and hardware bag from box, and make sure that no
parts are missing by referencing the illustrations on the installation instructions.
9. BLACK FIXTURE WIRE
10. FIXTURE GROUND WIRE
11. CEILING PAN
12. SCREW
13. SOCKET
14. SHADE
15. Lamp Holder Nut
INSTALLATION AND ASSEMBLY
1. Pull the power supply wires out from the outlet box (1). Attach the
mounting backplate(2) to the outlet box using two mounting screws (3).
2. Make wire connections, connect the black supply wire (5) to black fixture
wire (11), white supply wire (4) to white fixture wire(10) and the fixture
ground wire(12) to supply ground wire(6) using wire nuts (7).
Wrap all wire connections with electrical tape for secure connection.
3. Place the pan base (11) of the lamp over the mounting backplate (2).
Insert the fixture pan screws (12) and tighten to secure the lamp to the
ceiling.
4. Attach the socket (13) and shade (14)to socket assembly(15)
5. Install light bulbs (NOT included), DO NOT exceed wattage maximum as
indicated on the rating label.
1. OUTLET BOX (NOT INCLUDED)
2. MOUNTING SCREW
3. MOUNTING BRACKET
4. WHITE SUPPLY WIRE
5. BLACK SUPPLY WIRE
6. SUPPLY GROUND WIRE
7. WIRE NUT
8. WHITE FIXTURE WIRE
1
2
3
4
8
5
9
6
10
7
12
11
13
14
A
B
C
1
2
3
4
8
5
9
6
10
7
12
11
13
14
15
1
2
3
4
8
5
9
6
10
7
12
11