Quick Start Guide

Connecting Ethernet
1. Connect Ethernet cable(s) to the Ethernet port(s).
Note: PoE is disabled by default and can be enabled
using the configuration interface.
Configuration
Connect to your LAN via Ethernet or Wi-Fi.
Ethernet
If connected to the LAN via Ethernet, the SolarSwitch will attempt
to obtain an IP address automatically from a DHCP server. Use the
Ubiquiti Device Discovery Tool to determine its IP address.
If there is no DHCP server on the LAN, the SolarSwitch will fall back
to the following IP address: 192.168.1.20
Wi-Fi
Connect your notebook, tablet, or smartphone to the SolarSwitch
SSID named SolarSwitch-XYZ, where XYZ represents the last three
characters in the MAC address of the SolarSwitch.
Once connected to your wireless network, the SolarSwitch will use
the following IP address: 192.168.153.1