Product Description

Technical specifications
Wi
-
Fi Build-in Wi
-
Fi 802.11a/b/g/n（2.4G/5G）
Camera 500W AF
FLASH 8GB Nand Flash
CPU basic
frequency
1.4GHZ four cores
Keys Power key, volume key
Display 5.99 inch IPS, resolution 1440
×
720
Operating
system
Android 7.1
Bluetooth Support of bluetooth 3.0/4.2BLE and iBeacon
RAM 1GB LPDDR3
Interfaces
Configuration interfaces Type-c, SIM, PSAM,
support of OTG
Printer type Thermal Printer
Printing paper
specifications
Width 58mm, maximum diameter 40mm
Touch screen Capacitive two-touch screen
Wireless data
2G：B2/B3/B5/B8
3G：WCDMA(B1/B2/B4/B5);EVDO(BC0/BC1)
4G：B2/B4/B7/B17/B28
Item Technical Specifications
Battery 7.6V/2580mAh
NFC mifare/ISO 14443 Type A/B/ISO15693
Outline
dimensions
L 214mm × W 83mm × H 49mm
Adapter
OUTPUT：DC5V/2A
INPUT：AC100~240V/0.3A 50/60Hz
Adapter Model TPA-23A050200UU01
User Guide
T5921
List of packaged items
Terminal device × 1
User's Guide × 1
Charger & Adapter × 1
USB Cable × 1
Name of parts
Circuit board
（Pb） (Hg) (Cd) (Cr(VII) (PBB) (PBDE)
Toxic and harmful substances and elements
Shell
:It indicates that the content of toxic and harmful substances in all homoge-
neous materials of this part is below the limit specified in SJ/T11363-2006.
:It indicates that the content of toxic and harmful substances is higher than
the limit specified in SJ/T11363-2006 in at least one homogeneous material
of this part; however, the the reason why the toxic substance of that part
exceeds the limit is that there is no applicable material to replace it currently.
For products that have reached or passed the service years for environmental
protection, they should be recycled according to Measures for Control and
Management of Electronic Information Products and should not be thrown
away at will.
Name and content of toxic and harmful substances
contained in this product are shown in the following table
Manufacture
Shanghai Sunmi Technology Co., Ltd.
Room 505 No.388 Song Hu Road Shanghai, China
This product can be used across EU member states.
The full text of the EU declaration DOC is available at the following
internet address：www.sunmi.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC ID:2AH25T5921
NOTE: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply With RF exposure
requirements, a minimum separation distance of 1.0cm must be maintained between the
user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be
avoided.
Specific Absorption Rate (SAR) information:
This wireless phone meets the government's requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg
averaged over one gram of tissue.
Device types: T5921 has also been tested against this SAR limit. The highest SAR value
reported under this standard during product certification when properly worn on the
body is 1.218W/kg (1gSAR, test distance:5mm, limit 1.6W/kg), 1.529W/kg(10gSAR,
test distance:0mm, limit 4W/kg) and 1.359W/kg(1gSAR, test distance:19mm(power
sensor), limit 1.6W/kg). This device was tested for body-worn operations with the back
of the handset kept 10mm and 5mm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain a 10mm and 5mm separation
distance between the user's body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided.