Installation Instructions Sunnex Solo Spot Exam Light Models: HM2006-38EXT, HM2005-37EXT, HM2017-44EXT 1.1 Applications The Sunnex Solo Spot Series light was designed specifically for medical applications where a focused cool light is required. 1. SoloSpot with direct mount 2. SoloSpot with wall mount 3. SoloSpot with C-Clamp 4. SoloSpot with trolley base 1.2 Cleaning and Disinfection The lamp fixture can be cleaned as needed with a damp cloth and a mild detergent.
The glass lens can be cleaned with a damp cloth and a mild detergent and inside part of the lens can be easily cleaned with Q-tips. Technical Data 2.1 Manufacturer Sales office Sunnex, Inc. 3 Huron Drive Natick, MA 01760, USA Phone: 508-651-0009 Fax: 508-651-0099 Email: sunnex@sunnex.com Production Facility Sunnex, Inc. 3 Huron Drive Natick, MA 01760, USA Phone: 508-651-0009 Fax: 508-651-0099 Email: sunnex@sunnex.com 2.
Transportation and storage temperature: -5°F / -20°C to 140°F / 60°C Humidity < 95% 2.4 Bulb replacement 6 5 1. Lamp front, part#: 18702 2. Bulb support, part#: 18291 3. Color filter, part#: 18676 4. MR 16 bulb, part#: 18562 5. Lamp back, part# 18016 6. Screws, part#: 4475057 4 2 1 3 1. Unplug lamp from power source and wait at least one hour for lamp to cool. 2. Loosen the connecting cable from the transformer to make sure that lamp is not supplied with voltage. 3.
2.0 Assembly Instructions 2.1 SoloSpot Mobile (HM2006-38EXT) 1. Place the pole (2) in the center housing (4) 2. Press down until you feel resistance. Assemble the clamp plate (5) using the provided screw (7) and washer (6). Do not tighten the screw. The teeth on the plate should face inwards. 3. Insert each of the 5 legs into the center housing, and place the 2 lockable casters on opposite sides. 4. Tighten the screw (7).
2. SoloSpot with wall mount 3.
CAUTION! The arm is equipped with friction joints. Do not tighten the joints excessively as this will cause uneven movement and could damage the arm. 2.3 SoloSpot Ceiling (HM2017-44EXT) 1. Securely fasten lamp down tube from ceiling. It is recommended that 6-5/16" diameter or larger fasteners of the proper length for your individual application be used. Be sure down tube is securely mounted to structural framework. Down tube should be mounted plumb and square to ceiling surface. 2.
2.6 Symbols CE-Mark AC powered: This product must be sorted as Waste from Electrical and Electronic Equipment (WEEE): 3. Sunnex Limited Warranty 3.1 Limited Warranty. Sunnex warrants that the Product, if properly used, will be free from defects in material and workmanship, for a period of three (3) years from the date of shipment to Customer. This Limited Warranty extends only to the original buyer.
CUSTOMER’S USE OF THE PRODUCT, EVEN IF SUNNEX IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, THE TOTAL LIABILITY OF SUNNEX TO YOU FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE PURCHASE PRICE YOU PAID FOR THE PRODUCT. THIS LIMITATION SHALL APPLY REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE).
The provisions of this Limited Warranty shall be governed by the laws of the Commonwealth of Massachusetts without regard to its conflict of laws principles. This Limited Warranty shall not be modified except by an agreement signed by both parties specifically referencing this Limited Warranty.
Guidance and manufacturer’s declaration — electromagnetic immunity The SoloSpotTM Image Intensifier is intended for use In the electromagnetic environment specified below. The customer or the user of the SoloSpotTM Image Intensifier should assure that it is used in such an environment.
Guidance and manufacturer’s declaration — electromagnetic immunity The SoloSpotTM is intended for use In the electromagnetic environment specified below. The customer or the user of the SoloSpotTM should assure that it is used in such an environment.
Recommended separation distances between portable and mobile RF communications equipment and the SoloSpotTM The SoloSpotTM is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
