ASUNA 7750P PINK SPACEFLEX MOTORIZED TREADMILL 1
INDEX IMPORTANT SAFETY INFORMATION………………………………………………………… 1 EXPLODED DIAGRAM……………………………………………………………………… 2-3 PARTS LIST……………………………………………………………………………………………. 4-6 TOOLS & HARDWARE…………………………………………………………………….…7 ASSEMBLY INSTRUCTIONS………………………………………………………………........ 8-9 FOLDING INSTRUCTIONS……………………………………………………..……………..… 10 MOVING INSTRUCTIONS……………………………………………………………………..… 11 SPECIFICATION………………………………………………………………………………..….12 IMPORTANT ELECTRICAL INFORMATION…………………………………………… ...
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
Exploded Diagram 1
Exploded Diagram 2
Parts List NO. DESCRIPTION SPEC. QTY NO. DESCRIPTION SPEC.
NO. DESCRIPTION 47 Safety Key Seat 48 C-shape Snap Ring 49 SPEC. QTY 1 NO. DESCRIPTION SPEC.
NO. DESCRIPTION SPEC. QTY NO. DESCRIPTION SPEC. QTY 93 Flat Washer Φ12.2*Φ17*T0.5 4 116 Screw M8*35 1 94 O Shaped Ring inner Φ13 wire Φ1.5 2 117 Screw M4*12 4 95 Running Board Baffle 2 118 Screw M6*25 6 96 Power Cord 1 119 Screw BT2.
Tools & Hardware When you open the carton, you will find the below spare parts.
Assembly Instructions STEP 1: Hold the Handlebars (No. 3L & No. 3R). Press the Foot Lever (No. 115) until you hear a click, then raise the Handlebars (No. 3L & No. 3R) to a vertical position until you hear a click. Lightly shake the Handlebars (No. 3L & No. 3R) to make sure they are secure. STEP 2: Stand in front of the treadmill. Turn the Tablet Bracket (No. 4) upward as shown in drawing A, then pull it slightly to the left as shown in the drawing B to lock in position.
STEP 3: Remove Plugs (No. 137). Save the Plugs (No. 137) for later use when you remove the Handrails (No. 114). Attach the Handrails (No. 114) to the treadmill bracket with 4 Screws (No. 75). 108 STEP 4: Power Cord (No. 96) to the treadmill. Insert the Safety Key (No. 128) into the Meter (No. 108).
Folding Instructions Before you fold the treadmill, remove the 4 Screws (No. 75) and remove the Handrails (No. 114). If you saved the Plugs (No. 137), you can plug in the holes. Stand in front of the treadmill. Fold the Tablet Bracket (No. 4) by pulling it to the right as shown in drawing A. Then, turn it down as in the drawing B. Hold the Handlebars (No. 3L & No. 3R). Press the Foot Lever (No. 115) until you hear a click. Then, lower the Handlebars (No. 3L & No. 3R).
Moving Instructions Before moving the treadmill, fold the treadmill first. Pull out the supporting moving wheels according to the drawing, to ensure the folded treadmill is stable when standing upright. To store the treadmill upright, lift the treadmill so it stands vertically. To move the treadmill, tilt the treadmill towards you until the transportation wheels on the front base touch the ground. Then you can move the treadmill in front and back or left and right directions.
Specification Assembly Size (INCHES) Speed Range 57.3(L)*29.3(W)*48(H) Folded Standing Size (INCHES) 29.3(L)*10.4(W)*57.3(H) Running Size (MI/H) 0.6—8.0 Rating 930W Motor Spec (INCHES) 51.2(L)*19(W) (HP) N.W. (LBS) 120 Input Volt (V) Max User Weight (LBS) 2.
Important Electrical Information WARNING: This treadmill requires a power source of 10 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. GROUNDING METHODS: This product must be grounded.
Operating Instructions 1. Plug the power cord into an outlet with appropriate voltage. 2. Turn on the power switch. 3. Insert the Safety Key. 4. Press the START button on the console. Never start the treadmill while you are standing on the running belt. After connecting the power, there may be a pause after the running belt begins to move, you should always stand on the treadmill side plastic non-slip rails until the belt starts moving. Then step on to the belt. SAFETY NOTE: 1.
Display Console Windows Display: a. “ Incline”: Displays current incline value. b. “ Pulse/ c. “ Calorie”: Displays current pulse value and the calories burned. Time/ d. “ Distance/ e. “ Program”: Displays current exercise time and the current program. Mode”: Displays current exercise distance and current mode. Pedometer”: Displays current steps value. f. “ Speed”: Displays current exercise speed. Key Functions: a.
Instant Start: a. Turn on the power. Insert the safety key in the meter. b. Press “ Start”, system enters into 3 second countdown and the treadmill makes a beeping sound. “ Time/ Program” window displays the countdown numbers at the same time. After the 3 second countdown, the treadmill starts at 0.6 MI/H speed. c. After starting, adjust the treadmill speed and incline using handrail buttons.
Manual Mode: a. In standby mode, press “ b. In standby mode, press “ “ Time/ Start”, and the treadmill starts at 0.6 MI/H speed and 0% incline. Mode”, to enter time countdown. Program” window displays “30:00” and flashes and the time icon will light up. Press the handrail buttons on either side to set exercise time: setting range is: 5:00-99:00. c. At time countdown mode, pressing “ Mode” enters the distance countdown mode. “ Mode” window displays “3.
TIME 1 2 3 4 5 6 7 8 9 10 speed 0.6 2.5 1.9 2.5 1.9 3.1 2.5 1.3 3.1 1.9 incline 1 2 3 3 1 2 2 3 2 2 speed 0.6 3.1 2.5 3.8 2.5 3.8 2.5 1.3 2.5 1.3 incline 1 2 3 3 2 2 3 4 2 2 speed 0.6 3.1 2.5 3.1 2.5 3.1 2.5 1.3 1.9 1.3 incline 1 2 2 3 1 2 2 2 2 1 speed 0.6 3.8 4.4 3.1 5 3.1 5.6 3.8 2.5 1.9 incline 2 2 3 3 2 2 4 6 2 2 speed 0.6 3.8 4.4 3.1 5 3.8 4.4 3.8 2.5 1.
Audio: When the power is on, you can connect the MP3 wire to audio device to play music. When the treadmill powers down and enters sleep mode, the music will stop. Pressing any key will reactivate the treadmill. USB Interface: USB connection can only charge your device. It cannot be used to play music. Metric/Imperial Unit Change: Press “ Start”. Remove safety key, then connect the safety key. You can enter measurement unit setting.
Treadmill Error Codes: If the treadmill displays error code, please contact Customer Service at support@sunnyhealthfitness.com. Er1: Display panel couldn’t receive the signal. Er3: Over voltage. Er4: IGBT short circuit (Over current). Er5: Over load. Er6: The motor is not connected, (only direct current). Er7: The controller couldn’t receive the signal. Er8: Preventing reversing switch action. Er13: Over current. Er14: Over-loading; short-circuit. A.
Maintenance Instructions Cleaning Please make sure the treadmill's power plug is unplugged before cleaning the machine. Keep the treadmill clean by dusting it regularly. Be sure to clean the exposed parts on both sides of the running belt. This can reduce the dust underneath. Make sure your shoes are clean to avoid any foreign material damaging the running belt and running board. The top of the belt needs to be cleaned with a wet, soapy cloth.
Maintenance Guidelines 1. In order to maintain and prolong the life of your treadmill, we suggest you power it off for 10 minutes after every 2 hours of use. 2. A loose running belt will slip off when running. The tightness of the running belt will affect the performance of the motor. The perfect state is when the running belt can be lifted from the running board about 50-75mm. Adjusting Belt Centering and Tightness: a. If the Running Belt (No. 25) doesn’t stop when you press it, the Running Belt (No.
Lubrication *IMPORTANT NOTE: This treadmill does come pre-lubricated, but it is recommended to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Board (No. 24) and Running Belt (No. 25) is essential as the friction between the two affects the life span and function of the treadmill. It is suggested that the Running Board (No. 24) and Running Belt (No. 25) be inspected regularly. Should you find any wear on the Running Board (No.
