Use and Care Manual
23
ISSUE CAUSE INSPECTION and ELIMINATING
No Power On
(can’t turn on)
Battery Power
NOT enough
Replace two new batteries AA-size (UM-3), and make sure positive (+) and
negative (-) pole at the right position.
Display Off
Battery Power
NOT enough
Replace two new batteries AA-size (UM-3), and make sure positive (+) &
negative (-) pole at the right position.
Data does not
change (during
the exercise)
Console is
showing
「 PAUSE 」
or 「STOP」
When the screen is showing 「PAUSE」 or 「STOP」, console is at pause or
stop state.
You may press START to start, and TIME display screen will continue
counting. Console will continue to work.
Speed sensor
NOT
connected
completely
When the screen is showing「TIME」, console is at start state. And, SPEED &
SPM display data will show “0.” This means console detect no exercise.
Please check and connect the console wire completely.
Suddenly no
display
Console NO
input for
long time
(into SLEEP
MODE)
Console is with power-saving function. It will go
into SLEEP MODE
automatically, if after 4 minutes of no input or exercise.
You may press any button or pull the handlebar more than 30cm to wake
up console.
TROUBLE SHOOTING