Use and Care Manual

3. Operating Instructions:
A. Press Start/Pause button “ ”, the treadmill will countdown for 3 seconds and begin the
initial speed of 0.6 mi/h.
B. Press Speed increase and Speed decrease button can adjust the speed.
C.
Press Speed shortcut button
can quickly set the speed to the Speed
displayed on the button.
D. When the treadmill is running, press Stop button “ ” t o stop the treadmill.
E. Pulling out the safety key can instantly stop the treadmill. The LED screen display will show
“--- ” and the treadmill will start to beep.
F. In manual mode, when the time is more than 99:59 (100 minutes), the treadmill will stop.
4. Safety Lock Function:
At any state, pull off the safety lock. The LED screen will display “--- ” and the treadmill will start
to beep. When the safety key is off, no functions will display.
5. Power Saving Mode:
This system has a power saving function. In standby mode, if there is no button command
inputted within 10 minutes, the system will enter power saving mode. Press any button to start
the system back up.
6. MP3 Function:
When the power is connected, connect an MP3 or other audio device to play music. The volume is
controlled on the audio device. Please pay attention when controlling the volume. Volume level can
affect the quality of the built-in audio circuit.
Note: Plug in the MP3 line from the back of the Meter Bracket Horizontal Tube (No. 4).
7. Shutdown:
You can turn off the power to shut down the treadmill at any time. This will not damage the
treadmill.
8. Attention:
A. Check the power and safety lock before starting any exercise.
B. In the event of an emergency, pull off the safety lock to stop the treadmill.
This will put on the safety lock and set the treadmill back to the default settings.
C. If there is any problem, please contact the distributor. Do not attempt to disassemble
or perform maintenance on the treadmill as this can be damaging to the equipment.