Use and Care Manual

E1 (Error 1):

When the machine starts and the computer does not detect signal from the sensor for

7 seconds, E1 will be shown on the computer.

E6 (Error 6):

When the machine starts and the computer could not read the VR signal from incline motor

for 6 seconds, E6 will be shown on the digital display.

If any above trouble happens, please consult the distributor.

E3 (Error 3):

E3 shows when the cable from computer and control box is not well-connected or damaged.

If the cable works well, check if the computer or control box is damaged.

NOTE:

If any odor is detected from motor, please apply some silicone on the running deck. ( Please refer

to page 3-4: TREADMILL RUNNING DECK LUBRICATION ) and see if the situation improves.

Then, consult the distributor for necessary help. If the odor persists, discontinue use and consult

your distributor.

WARNING

• DO NOT ALLOW CHILDREN TO USE THE MACHINE.

• TURN OFF THE MASTER POWER SWITCH AND UNPLUG THE POWER CABLE FROM

OUTLET WHEN NOT IN USE.

• FOR SAFETY REASON, ALWAYS KEEP THE CHILDREN AWAY FROM THE MACHINE.

• FOR SAFETY CONCERN, DO NOT OPERATE OTHER DEVICES WHEN YOU ARE

RUNNING, WALKING, OR CLIMBING AT HIGH SPEEDS.

Error Code & Trouble Shooting