Use and Care Manual

29
Make sure the treadmill is off and unplugged from the electrical outlet . To remove dust, use a
small vacuum nozzle to carefully vacuum around all visible components . To remove film or
dust, use a slightly damp rag with a mild cleaning agent. Spray this onto the rag only.
Becareful not to immerse any treadmill component in any liquids .
Check that all fasteners are properly tightened, and all wiring is securely in place . To avoid
damaging fasteners, do not over tighten .
Store your treadmill in a clean and dry environment . Make sure the master power switch is off
and is unplugged from the electrical outlet .
Cleaning
Inspecting Fasteners & Wiring
Storage