Upright Row-N-Ride Exerciser No. 077 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DIAGRAM A HARDWARE PACKAGE #12 1pc A 1pc #6 B 1pc 1pc 2 B
PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description Spec. Sponge Plug Bolt M8 Handle Bar Washer Nut M8 Handle Bar Tube Bushing Pedal Connecting Tube Knob M16 Bearing Sleeve Bolt M8 Pedal (L) Bearing Sleeve Connecting Tube Bearing Sleeve Plug Seat Cushion Fixed Iron Sheet Screw M6 Knob M8 Plug M10 Bolt Stopper Qty. 2 2 2 1 6 6 1 1 1 1 2 2 1 4 1 4 1 1 1 2 1 2 3 1 No.
ASSEMBLY INSTRUCTIONS STEP 1: Open the Main Frame (No. 28) as shown in the picture on the left. Note: The Pin (No. 29) has been inserted into Front Connecting Tube (No. 32). STEP 2: 32 33 5 33 B 5 36 35 35 28 33 5 33 5 B 38 Remove preassembled 4 Bolts (No. 35) , 4 Nuts (No. 33) and 4 Washers (No. 5) from the Front and Rear Stabilizers (No. 36 and No. 38) and attach the Front and Rear Stabilizers (No. 36 and No. 38) to the Main Frame (No. 28) using 4 Bolts (No. 35) , 4 Nuts (No.
STEP 4: 7 Loosen Knob (No. 10) and insert Handle Bar Tube (No. 7) into Main Frame (No. 28). Tighten Knob (No. 10) to secure. 10 28 STEP 5: Remove preassembled 2 Bolts (No. 3), 2 Washers (No. 5) and 2 Nuts (No. 6) from the Handle Bar (No. 4) and attach the Handle Bar (No. 4) to the Handle Bar Tube (No. 7) using 2 Bolts (No. 3), 2 Washers (No. 5) and 2 Nuts (No. 6) and secure with Wrench and Spanner (A & B). 7 A B STEP 6: 41 Insert the Meter (No. 41) onto the tab on the Handle Bar (No. 4).
EXERCISE COMPUTER SPECIFICATIONS: TIME…………………………………………………..00:00-99:59 MIN/SEC. COUNT……………………………………………….......0-9999 STROKES CALORIES……………………………………………............ 0-9999KCAL TOTAL CNT……………………………………………….0-9999 STROKES FUNCTIONS: TIME: Displays the workout time while exercising. COUNT(CNT): Accumulate the strokes while exercising. CALORIES(CAL): Displays calories amount burned while exercising. TOTAL CNT(TOT.CNT): Displays the total number of strokes since batteries installed.
ADJUSTMENT INSTRUCTIONS ADJUSTING THE HANDLE BAR Loosen the Knob (No. 10) and pull. Raise or lower the Handle Bar Tube (No. 7) to desired height. Tighten the Knob (No. 10). 7 10 ADJUSTING THE SEAT Loosen and remove the knob located under the Seat Post. Move seat, insert knob and tighten to secure. ADJUSTING THE SEAT TUBE To adjust the Seat Tube, lift the Seat Post. Remove Pin (No. 29) and raise or lower the Seat Tube. Insert pin to secure. Lower the Seat Post.
FOLDING INSTRUCTIONS A. Adjust the handle bar post to the lowest level B. Adjust the seat tube to the lowest level C. Hold the handle bar and fold the product. 8 Version 1.