WOOD PLYO BOX WITH COVER NO. 084 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 – 90 SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
PARTS LIST NO. A B C D E PART Board Board Board Board Board Screw Cam Connector Wood Dowel Foam Cover Side Foam Cover SPECIFICATION 22.6 x18.7 28.5 x18.7 30x20 24x20 30x24 QTY 1 1 2 2 2 32 32 32 2 2 Ordering Replacement Parts (U.S.
EXPLODED DRAWING Screw Wood Dowel 3
ASSEMBLY INSTRUCTIONS Tools needed: screwdriver (not included) STEP 1: Insert Screws into the Boards C, D, and E as shown. Insert Wood Dowels into the holes in C, D, and E as shown. Cam Connectors are pre-installed in the boards. The sides of the boards that have the C, D or E labels face the inside. STEP 2: Fit A onto B.
STEP 3: Note: Check the arrow on the Cam Connectors are pointing in the direction of the screw hole so the screws can fit into the Cam Connectors. Assemble 2 pcs C to A. Fit the screws into the Cam Connectors. Turn the Cam Connectors clockwise to tighten. STEP 4: Note: Check the arrow on the Cam Connectors are pointing in the direction of the screw hole so the screws can fit into the Cam Connectors. Repeat to assemble 2 pcs D. Fit the screws into the Cam Connectors.
STEP 5: Note: Check the arrow on the Cam Connectors are pointing in the direction of the screw hole so the screws can fit into the Cam Connectors. Assemble 2 pcs E to C and D. Fit the screws into the Cam Connectors. Turn the Cam Connectors clockwise to tighten.
ADDING THE COVER A foam cover for the plyo box is included. This is OPTIONAL. Fit the side foam covers to the box. The sides with the Velcro strips along the top and bottom face outside. Fasten the Velcro. Fit the top and bottom covers onto the box. Fasten the Velcro. Make sure the Velcro strips are securely fastened along all edges. The dimensions of the box with the added cover are 32” x 26” x 22”. 7 Version 1.