PARTS LIST No. Description Qty. No. Description Qty.
HARDWARE PACKAGE 4
ASSEMBLY INSTRUCTIONS Step 1: Secure Front stabilizer (17) to Main frame (21) with Bolts (16), Arc washers (19) and Nuts (20).
Step 2: a b A. Connect Sensor wire a (9) with Sensor wire c (12). Then connect Sensor wire b (10) with Sensor wire d (14).(See diagram a above) B. Connect Tension hook (13) with Tension control cable (11).(See diagram b above) C. Secure Handlebar post (5) to Main frame (21) with Screws (8) and Arc washers (7).
Step 3: A. Connect Computer wire (1a) with Sensor wire a (9), then secure Computer (1) to Handlebar post (5) with Screws (42). Insert Sensor wire b (10) into the back of Computer (1). B. Secure Pedals (18L/R) onto the left and right crank of the Main frame (21). ★CAUTION: The left side of the machine has reversed threading. You must screw the left pedal counter-clockwise to tighten. The right pedal is tightened by turning clockwise.
Step 4: A. Secure the Rear stabilizer (27) to the Rear main frame (25), with Bolts (16), Arc washers (19) and Nuts (20). B. Secure Backrest frame (39) to Rear main frame (25) with Screws (8), Spring washers (38) and Washers (32). ★Note: For easier installation of next step, try flipping Rear main frame (25) over. C. Secure Seat cushion (40) and Backrest cushion (41) to Backrest frame (39) with Screws (8) and Washers (32).
Step 5: A. Connect Sensor wire d (14) with Sensor wire 5 (24), then secure the Rear main frame (25) to the Main frame (21) with the Knob (22). ★CAUTION: There are different holes on the Rear main frame (25) which can be used for people with different height. You can find the best position hole for your height. At the farthest point of the pedal’s travel, your knee should still have a slight 15 degree in it.
Step 6: A. Secure Handle bar (34) to Backrest frame (39) with Bolts (37), Washers (32) and Nuts (31). B. Connect Sensor wire 5 (24) with Handle pulse wire (30). Installation is complete. Version: Jan.