Manual

7
Step 3:
A. Connect Computer wire (1a) with Sensor wire a (9), then secure Computer (1) to
Handlebar post (5) with Screws (42). Insert Sensor wire b (10) into the back of
Computer (1).
B. Secure Pedals (18L/R) onto the left and right crank of the Main frame (21).
★CAUTION: The left side of the machine has reversed threading. You must
screw the left pedal counter-clockwise to tighten. The right pedal is tightened by
turning clockwise. Failure to follow these instructions can result in permanent
damage to your bike.