User's Manual

11
OPERATING INSTRUCTIONS
5
1. Plug in the Power Cable (No. 4). Turn on the Power Switch (No. 5). The machine will beep and
LED display will show “OFF“. This is standby mode.
2. Press the Start/Pause button on the console or the remote control to start the bike, it will begin in
manual mode. Display will show L1. Press the Start/Pause button longer than 5 seconds, the
bike will clear all the LED display information.
3. Under the manual mode, press the Speed “+” button to increase the speed from L1 to L18. Or
press the Speed “–” button to decrease the speed from L18 to L1.
Level
Speed
(MPH)
Rotate Speed
(RPM)
Level
Speed
(MPH)
Rotate Speed
(RPM)
L1
0.674
32
L10
1.412
67
L2
0.737
35
L11
1.496
71
L3
0.843
40
L12
1.559
74
L4
0.948
45
L13
1.622
77
L5
1.032
49
L14
1.685
80
L6
1.074
51
L15
1.749
83
L7
1.180
56
L16
1.791
85
L8
1.285
61
L17
1.854
88
L9
1.369
65
L18
1.896
90
4. Under the manual mode, press the Direction button to change the direction forward or backward.
5. Under the manual mode, the LED display will alternate display between speed level, speed and
time.
6. Press the Mode button on the console or the remote control to change the mode from manual
mode to auto mode P1, press again from P1 to P2 mode, press again from P2 to P3, then press
again from P3 back to the manual mode.
4