MAGNETIC CYCLING TRAINER SF-B0419 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner’s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DRAWING 2
PARTS LIST NO. 1 PART DES. Handle Bar QTY NO. PARTS 10 1 11 2 Screw 4 12 3 Washer 4 13 4 Meter 1 14 Screw 2 15 6 Nut 4 16 L 7 Tension Knob 1 17 R 5 Main Frame 9 Cover 2 3 Cap Nut 4 Washer 4 Front Stabilizer 1 Bolt 4 Left Pedal 1 L Nut (for Left Pedal) 1 Left Crank Arm 1 Right Pedal 1 Nut (for Right Pedal) 1 Right Crank Arm 1 20 Rear Stabilizer 1 21 Adjust Knob 1 A Allen Wrench 1 B Spanner 1 19 1 QTY L 18 8 DES.
ASSEMBLY INSTRUCTIONS STEP: 1 Loosen and remove the Adjustment Knob (No. 21) and unfold the Main Frame (No. 8) then re-insert and tighten the Adjustment Knob (No. 21). Attach the Front and Rear Stabilizers (No. 12 and No. 20) to the Main Frame (No. 8) using 4 Bolts (No. 13), 4 Washers (No. 11) and 4 Cap Nuts (No. 10), tighten using Spanner (B).
STEP: 2 Attach the Handlebar (No. 1) to the Main Frame (No. 8) using 4 Screws (No. 2), 4 Washers (No. 3) and 4 Nuts (No. 6), tighten using Allen Wrench (A) and Spanner (B). STEP: 3 Insert the Meter Wires (4-1 and 4-2) through the hole of the meter bracket located along the top end of the Main Frame (No. 8). Connect the Meter Wire (4-2) to the connecting wire (8-1). Then using 2 Screws (No. 5) and Allen Wrench (A) attach and secure the Meter (No. 4) to the meter bracket located on the Main Frame (No. 8).
STEP: 4 Connect the Left and Right Pedals (No. 14 and No. 17) onto the Left and Right Crank Arms (No. 16 and No. 19). (Before you begin, immobilize the crank arms by turning the tension knob all the way to the right). Left Pedal: Align the Left Pedal (No. 14) with the Left Crank Arm (No. 16) at 90 degrees. Gently insert the pedal into the crank arm, turn the pedal counter-clockwise as tightly as you can with your hand. Use Nut (No. 15) (Left Pedal Nut) to secure the left pedal, tighten using Spanner (B).
EXERCISE COMPUTER SPECIFICATIONS: TIME…………………………………………………....00:00-99:59 Min/Sec. SPEED………………………………………………... 0.0-99.9KM/H or ML/H DISTANCE………………………………………….... 0.00-999.9KM or ML ODOMETER…………………………………………. 0-9999KM or ML PULSE………………………………………………... 40-240BPM CALORIES…………………………………………… 0-9999KCAL KEY FUNCTIONS: MODE: Press to select function. (Time, Speed, Distance, Odometer, Pulse, Calories). -Press and hold the mode button for three seconds to reset time, distance and calories. OPERATION PROCEDURES: 1.
OPERATION & MAINTENANCE OPERATING INSTRUCTIONS: 1. Please read all instructions before attempting to assemble the equipment. While assembling and during the use of the equipment, please make sure to follow all instructions carefully, any improper techniques of use and/or assembly may result in injury and/or damage to the equipment. 2. The suggested exercise regimen for optimal results is 10-15 minutes per day, at least three times a week. 3.
FOLDING INSTRUCTIONS FOLDING THE BIKE: To fold the bike, remove the Adjustment Knob (No. 21) from the Main Frame (No. 8). Next, push the front and rear stabilizer bars inward towards each other until the bike is completely folded. Re-insert the Adjustment Knob (No. 21) to secure the bike in the folded position. 21 UNFOLDING THE BIKE: To unfold the bike, remove the Adjustment Knob (No. 21) from the Main Frame (No. 8).