INDOOR CYCLING BIKE SF-B1001 OWNER’S MANUAL The specifications of this product may vary from this photo and are subject to change without notice. For Customer Service, please contact: support@sunnyhealthfitness.
IMPORTANT SAFETY NOTICE Make sure you fully understand the following precautions before assembling and operating the machine: 1. Once fully assembled, please check that all hardware parts such as bolts, nuts and washers are positioned and secured firmly. 2. Please check regularly that the safety chain guard that protects the moving parts of the machine is secured and in good order. 3. Please always check the seat post, seat slider, pedals and handlebar are secured firmly before getting on the bike. 4.
EXPLODED DIAGRAM 2
PARTS LIST Part No. Description Qty Part No.
ASSEMBLY INSTRUCTIONS Step A: Install the Front stabilizer (2) and Rear stabilizer (3) to the Main frame (1) with the Bolts (14) and Flat washers (13). Please make sure that the Leveler feet are on the bottom and the transportation wheels are facing up and towards the front of the bike. Attach the Water bottle holder (19) to the frame with the Screws (17). Note: The Leveler feet (11) under the stabilizers can be adjusted to keep the equipment stable.
Step C: Lock the Saddle (7) on the Seat slider (6) tightly with wrench. Adjust the front & back distance of Seat slider (6), then lock the Seat slider (6) on the Seat post (5) tightly with Pop-pin knob (8). Insert the Seat post (5) to the rear upright tube of Main frame (1), then adjust the height properly and lock them tightly with Pop-pin knob (8).
OPERATION Leveling the Bike This bike can be leveled to compensate for uneven surfaces. To level the bike, please raise or lower four leveler feet located on the underside of the front and rear stabilizers (Fig.1). Resistance Adjustment Pedaling resistance is controlled by the tension control knob (Fig.2). To increase resistance turn the tension control knob clockwise (+). To decrease resistance turn the tension control knob counterclockwise (-). Resistance adjustment can be easily made at any time.
Handlebar Adjustment Loosen and pull the pop pin (Fig.5), then raise or lower the handlebar to the desired position for a more efficient & comfortable ride. Make sure the pop pin settles into the desired hole and then secure it firmly. Pedal Strap Adjustment Place the ball of each foot in the toe clip until the front of the shoe fits snugly in the toe clip cage.
