BELT DRIVE INDOOR CYCLING BIKE SF-B1002 OWNER’S MANUAL IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com.
Important Safety Information Please keep this manual for future reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 2.
EXPLODED VIEW 3 19 66 20 26 5 47 48 2 29 29 53 65 55 60 56 61 57 17 54 58 18 62 17 63 16 40 45 16 11 11 48 6 48 74 10 36L 11 76 16 15 23 72 71 9 10 9 10 71 11 48 15 74 10 34 13 74 10 1 7 22 73 42 71 67 11 69 21 17 73 72 48 68 35 17 15 75 37 71 62 44 43 62 39 77 64 64 70 36R 45 79 S14-15-17 2 71 71 41R 38 S6 78 5 14 9 59 12 10 59 15 43 31 28 59 12 13 59 42 74 10 27 30 51 52 48 25 41L 31 18 50 46 31 49 8 24 4 3233 40 66
PARTS LIST NO DESCRIPTION QTY NO 1 Main frame 1 41L/R 2 Saddle post 1 3 Handlebar 4 DESCRIPTION QTY Pedal YH-76X 9/16 1 42 Bearing 6004-2RS NBK 2 1 43 Jump ring d20 2 Handlebar post 1 44 Wave washer d20*Φ26*0.3 1 5 Adjustable bolt 2 45 Nut M10*1.25*H7.
HARDWARE PACKAGE #9 (M10*25*S6) 4PCS #10 (d10*Φ 20*2.0) 4PCS #19 (M10*25*S6) 2PCS #20 (d10*Φ 20*1.
ASSEMBLY INSTRUCTIONS STEP 1: 74 76 10 74 10 1 74 75 10 A. Unscrew the screws (74) with Allen wrench (77), then remove and discard the shipping rear tube (75) and the shipping front tube (76). B. You can save these parts for future packaging and transportation of the bike if desired.
STEP 2: #9 M10*25*S6 4PCS #10 d10*Φ 20*2.0 4PCS S6 9 10 6 9 10 1 7 A. Secure front stabilizer (6) and rear stabilizer (7) to main frame (1) with screws (9) and washers (10).
STEP 3: #22 M5*12*Φ 2PCS #23 d5*Φ 2PCS 23 22 22 21 23 41L 36L 36R 1 41R A. Secure water bottle holder (21) to main frame (1) with screws (22) and washers (23). B. Secure pedals (41L/R) to the crank (36L/R). The Left pedal has reversed threading, and must be screwed counter-clockwise to tighten; the right pedal has normal threading and can be screwed clockwise to tighten.
STEP 4: 26 2 8 16 16 1 A. Insert saddle post (2) into main frame (1), and adjust it to desired position, then tighten it with knob (16). B. Insert seat slider (8) into saddle post (2), and adjust it to desired position, then tighten it with knob (16). C. Secure saddle (26) to the seat slider (8). Note: Adjust the saddle, so the front of the seat is higher or lower to meet your comfort needs.
STEP 5: #19 M10*25*S6 2PCS #20 d10*Φ 20*1.5 2PCS 19 19 3 20 4 16 1 A. Insert handlebar post (4) into main frame (1), and adjust it to desired position, then tighten it with knob (16). B. Secure handlebar (3) to handlebar post (4) with screws (19) and washers (20).
ADJUSTMENTS S17 If the bike is unbalanced, please adjust it as indicated above. Unscrew the nut (48) by turning counter-clockwise (direction B), then rotate foot pad (15) until the bike is balanced. Lastly, tighten the nut (48) by turning it clockwise (direction A).
RESISTANCE ADJUSTMENTS Rotate the knob clockwise to increase the resistance. Rotate the knob counter-clockwise to decrease the resistance. Push down the knob to enforce the brake, and stop the bike immediately. If the brake pad is squeaking, please spray some silicon oil on the surface of the brake pad to reduce it.