CHAIN DRIVE INDOOR CYCLING BIKE SF-B1002C OWNER’S MANUAL IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.
Important Safety Information Please keep this manual for future reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 2.
EXPLODED VIEW 19 19 3 20 26 48 49 4 50 7 2 18 51 24 32 52 53 49 25 54 66 56 61 57 62 58 59 55 65 18 63 60 64 16 40 45 41L 31 33 31 29 27 30 11 36 13 12 16 14 9 11 49 43 8 14 12 9 10 13 29 15 37 28 31 17 10 5 49 47L 36 35 15 42 46 8 37 34 17 10 77 11 23 16 1 73 72 9 10 9 10 11 49 17 10 15 17 10 21 23 74 42 72 69 75 72 6 38 74 73 49 11 22 22 67 44 75 68 72 15 76 63 78 72 63 43 65 65 71 41R 39 70 47R 45 80 79 2 72 40
PARTS LIST NO DESCRIPTION QTY NO DESCRIPTION QTY 1 Main frame 1 29 Bearing 6001-2RZ NBK 2 2 Saddle post 1 30 Spacer Φ18*Φ12.1*22 1 3 Handlebar 1 31 Nut M12*1*H6*S19 3 4 Handlebar post 1 32 Nut M12*1*H19.5*S19 1 5 Front stabilizer 1 33 Washer d12*Φ24*2.0 1 6 Rear stabilizer 1 34 1 7 Seat slider 1 35 Nut M12*1.0*H11*S18 Small chain wheel two ways 16 teeth 8 Nut M8*H7.5*S13 2 36 Nut M35*1*Φ44*3.
7 EVA pad 1 70 Crank cover 1 58 Cow leather pad t5*25*138 1 71 End cap Φ38*14 2 59 Screw M5*20*Φ8.5 1 72 Screw ST4.8*16*Φ10 8 60 Screw M5*18*Φ12 1 73 Plastic washer φ6.5*Φ25*6 2 61 Screw M5*12*Φ10 1 74 Plastic washer φ6.5*Φ25*2 2 62 Nut M5*H4*S8 1 75 Screw M5*20*Φ8.5 2 63 Washer d6*Φ12*1.
HARDWARE PACKAGE #9 (M10*25*S6) 4PCS #10 (d10*Φ20*2.0) 4PCS #19 (M10*25*S6) 2PCS #20 (d10*Φ20*1.
ASSEMBLY INSTRUCTIONS STEP 1: 17 77 10 1 17 10 76 17 10 A. Unscrew the screws (17) with Allen wrench (78), then remove and discard the shipping rear tube (76) and the shipping front tube (77); B. You can save these parts for future packaging and transportation of the bike if desired.
STEP 2: #9 M10*25*S6 4PCS #10 d10*Φ20*2.0 4PCS 9 9 10 5 9 10 1 9 10 6 A. Secure front stabilizer (5) and rear stabilizer (6) to main frame (1) with screws (9) and washers (10).
STEP 3: #22 M5*12*Φ8.5 2PCS #23 d5*Φ13 2PCS 23 22 22 21 23 41L 47R 47L 41R 1 A. Secure water bottle holder (21) to main frame (1) with screws (22) and washers (23). B. Secure pedals (41L/R) to the cranks (47L/R). The Left pedal has reversed threading, and must be screwed counter-clockwise to tighten; the right pedal has normal threading and can be screwed clockwise to tighten.
STEP 4: 26 2 7 16 16 1 A. Insert saddle post (2) into main frame (1), and adjust it to desired position, then tighten it with knob (16). B. Insert seat slider (7) into saddle post (2), and adjust it to desired position, then tighten it with knob (16). C. Secure saddle (26) to seat slider (7). Note: Adjust the saddle, so the front of the seat is higher or lower to meet your comfort needs.
STEP 5: #19 M10*25 2PCS #20 d10*Φ20*1.5 2PCS 19 19 3 20 4 16 1 A. Insert handlebar post (4) into main frame (1), and adjust it to desired position, then tighten it with knob (16). B. Secure handlebar (3) to handlebar post (4) with screws (19) and washers (20).
17 19 ADJUSTMENTS If the bike is unbalanced, please adjust it as seen in picture to the left. Unscrew the nut (49) by turning counter-clockwise (diagram A ), then rotate foot pad (15) until the bike is balanced. Lastly, tighten the nut (49) by turning it clockwise (diagram B).
RESISTANCE ADJUSTMENTS Rotate the knob clockwise to increase the resistance. Rotate the knob counter-clockwise to decrease the resistance. Push down the knob to enforce the brake, and stop the bike immediately.