Use and Care Manual

ASSEMBLY INSTRUCTIONS

STEP 1:

Remove 4 Screws (No. 17) with Allen Wrench (No. 78),

then remove and discard Rear Shipping Tube (No. 76)

and Front Shipping Tube (No. 77).

You can save these parts for future packaging and

transportation of the bike if desired. {Screws (No. 17),

Washers (No. 10), the Rear Shipping Tube (No. 76) and

the Front Shipping Tube (No. 77)}.

STEP 2:

Attach Front Stabilizer (No. 5) and Rear Stabilizer (No. 6)

to Main Frame (No. 1) using 4 Screws (No. 9) and 4

Washers (No. 10). Tighten and secure with Allen Wrench

(No.78).

#78 S6 1PC

#9 M10*25*S6 4PCS

#10 d10*Φ20*2.0 4PCS

#78 S6 1PC