1. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 2.
Upper sensor wire Lower Sensor wire U shape slider
Fix onto
Fix onto tighten tighten
A. Connect the Lower Sensor wire (48) with the Upper sensor wire (46), then push the connected sensor wire back into the tube of Main frame(1). B. Fix the Front post (42) onto the Main frame (1) with Arc washers (41), Washers (7) and Screws (40).
Computer mount
USAGE AND MAINTENANCE 1. If there is no signal coming to the computer please check if the sensor wires (46 & 48) are connected correctly. 2. If the display becomes blurry, please replace the batteries to improve the result. 3. This bike can be leveled to compensate for uneven surfaces. To level the bike, please raise or lower the foot pads, which are located on the bottom of the front and rear stabilizers.
EXERCISE COMPUTER SPECIFICATIONS: TIME --------------------------------------------------00:00 - 99:59 MIN:SEC SPEED -------------------------------------------------0.0 – 999.9 KM/H OR ML/H DISTANCE ----------------------------------------------0.00 – 99.99 KM OR ML CALORIES ----------------------------------------------0.0 – 999.9 KCAL KEY FUNCTION: MODE: To select the func on you want. Hold the key for 4 seconds to have all values reset to zero . OPERATION PROCEDURES: AUTO ON/OFF .