BELT DRIVE INDOOR CYCLING BIKE SF-B1423 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DRAWING HARDWARE PACKAGE 2
PARTS LIST No. Description Spec. Φ23*3*550 Qty No. Description 1 35 Seat Spec. 1 Foam (A) 2 Handlebar Cover 1 36 Seat Slider 1 3 Handlebar (A) 1 37 Seat Post 1 4 End Cap Φ25*16 2 38 5 Screw M6*16*S4 4 39 6 Bolt M10*35*15*H6 2 7 Foam Grip Φ23*3*460 8 Adjustment 98-2 Qty 1 Φ61*M16*1.5*18*Φ8 3 Grommet Φ12*11*Φ3 1 40 Screw M6*10*Φ12 2 2 41 Front Cover 157*152*38.5 HIPS 1 Handlebar (B) 1 42 Crank Cap Φ25*7 2 9 Computer 1 43 Nut M10*1.25*H7.
No. Description Spec. D5*Φ13*1.0 Qty No. Description 4 81 Screw 1 82 Shipping Tube Spec. ST4.8*10*Φ8 Qty 69 Washer 70 Water Bottle Holder 71 Washer D5*Φ13*1 2 83 Screw 72 Screw M5*16*Φ10 2 84 Rear Stabilizer 1 73 Front Stabilizer 1 85 Main Frame 1 74 Foot Leveler Φ43*14*M8*25 4 86 Spacer Φ18*Φ12.2*11.5 1 75 End Cap 30*70*1.5t 4 87 Allen Wrench S6 1 76 Screw M8*40*20*S6 6 88 Spanner S13-14-15 1 77 Washer Φ16*Φ8*H1.
ASSEMBLY INSTRUCTIONS STEP 1: Remove the Screws (No. 83) with Allen Wrench (No. 87), then remove the Washers (No. 77) and Shipping Tubes (No. 82). You may discard these parts or save them in case you would like to repackage the item in the future. [Screws (No. 83), Washers (No. 77), and Shipping Tubes (No. 82)] STEP 2: Attach the Front and Rear Stabilizers (No. 73 & No. 84) to the Main Frame (No. 85) using 4 Screws (No. 76) and 4 Washers (No. 77). Tighten and secure with Allen Wrench (No. 87).
S15 S19 STEP 3: WARNING! Read instructions carefully as improper assembly may cause permanent damage to your bike. Remove the 2 Nylon Nuts (No. 90 L/R) located on the Pedals (No. 92 L/R). Screw the Left Pedal (No. 92L) counter-clockwise into its corresponding Left Crank (No. 45L). Once screwed in place, use the Spanner (No. 88) to hold the bolt of the pedal then screw Left Nylon Nut (No. 90L) clockwise into the thread end of the Left Pedal (No. 92L). Secure with Spanner (No. 89).
STEP 4: Loosen and remove the [seat slider] Adjustment Knob (No. 38). Insert Seat Slider (No. 36) into the Seat Post (No. 37). Adjust the Seat Slider (No. 36) to the desired position and reinsert and tighten Adjustment Knob (No. 38) to secure the post in place. Secure Seat (No. 35) to the Seat Slider (No. 36) with Spanner (No. 88). NOTE: Before you fully tighten the seat, you can adjust the front of the seat higher or lower to meet your needs. STEP 5: Loosen and remove the [handlebar] Adjustment Knob (No.
EXERCISE COMPUTER SPECIFICATIONS: TIME-------------------------------------------00:00-99:59 MIN:SEC SPEED----------------------------------------0.0-999.9 MI/H DISTANCE-----------------------------------0.00-99.99 MI CALORIES-----------------------------------0.0-999.9 KCAL FUNCTION KEY: MODE: Press to select function (Scan, Time, Speed, Distance, Calories). CLEAR: Press to reset value. Press and hold for 3 seconds to reset all values.
ADJUSTMENTS & USAGE GUIDE ➢ ADJUSTING THE BALANCE In order to achieve a smooth and comfortable ride, you must ensure that the stability of the bike is secured. If you notice that the bike is unbalanced during use, you should adjust the foot levelers located beneath the front and rear stabilizers. To do so, simply rotate the Foot Leveler (No. 74) until the bike becomes level with the floor surface. ➢ ADJUSTING THE TENSION & EMERGENCY STOP Adjust the tension by rotating the Tension Knob (No.
MAINTENANCE INSTRUCTIONS This is general information for daily, weekly, and monthly maintenance to be performed on your bike. DAILY MAINTENANCE After each exercise session, wipe down all the equipment: seat, frame, handlebars. Pay special attention to the seat post, handlebar post, and belt/chain guard. Sweat is very corrosive and may cause problems that require parts replacement later. 1. Get on the bike and engage the drive train. 2. Pay attention to any vibrations felt through the pedals.