Use and Care Manual

5
ASSEMBLY INSTRUCTIONS
STEP 1
Loosen and pull the Release Knob (No. 45) from
the folded Rear and Front Main Frame (No. 54
and No. 55) and unfold.
Attach Rear Stabilizer (No. 6) to the Front Main
Frame (No. 55) using 2 Curved Washers (No. 2),
2 Spring Washers (No. 3), 2 Carriage Bolts (No.
1) and 2 Cap Nuts (No. 4). Secure and tighten with
Spanner (No. A).
Attach Front Stabilizer (No. 7) to Rear Main
Frame (No. 54) with 2 Curved Washers (No. 2), 2
Spring Washers (No. 3), 2 Carriage Bolts (No. 1)
and 2 Cap Nuts (No. 4). Secure and tighten with
Spanner (No. A).
STEP 2
The Left Pedal (No. 12L) is marked L and the
Right Pedal (No. 12R) is marked R. Turn the
resistance knob all the way to the right until the
cranks are immobilized.
Align the Left Pedal (No. 12L) with the Left Crank
(No. 13L) at 90°. Gently insert the Left Pedal (No.
12L) into the Left Crank (No. 13L) and turn the Left
Pedal (No. 12L) counterclockwise and use
Spanner (No. A) to tighten.
Attach the Right Pedal (No. 12R) with the Right
Crank (No. 13R), at 90°. Gently insert the Right
Pedal (No. 12R) into the Right Crank (No. 13R)
and turn the Right Pedal (No. 12R) clockwise and
use Spanner (No. A) to tighten.
Attach the 2 Pedal Straps (No. 92L/R) to the
Pedals (No.12 L/R).