Use and Care Manual

8
STEP 6
Remove 4 Screws (No. 85) from the back of
the Meter (No. 86) with Allen Wrench (No. B).
Attach Meter (No. 86) to the Front Main
Frame (No. 55) with 4 Screws (No. 85) that
were removed. Insert Sensor Wire (No. 39)
into the hole on the back of the Meter (No. 86).
Make sure the wire does not get caught when
you attach the meter.
Insert Hand Pulse Wire (No. 83) into the hole
on the back of the Meter (86).
STEP 7
Connect Ankle Strap (No. 59) to the Exercise
Bands (No. 79) above the Cover (No. 58).
Connect the 2 Handles (No. 78) to the
Exercise Bands (No. 79) above the Tension
Knob (No. 80).
.